9L Fluid Evacuator Manual Oil Changer Hand Operated | Oil Change Fluid Extractor

Features：

Muti-size hose: change different sizes for different condition

Evacuates All Types Of Fluid Such As Engine Oil, Transmission Fluids, And Gear Oil Coolants

Probes can be stored in the holder when not in use.

To remove oil from a car engine, simply push the probe down the dipstick hole and pump the handle on the top of the unit.

Sets up a permanent fluid transfer while you do something else.

Avoids searching for drain plug keys and getting under the vehicle.

Can also be used for draining fish tanks, basins and sinks.

How To Use

1) Warm up the oil by running the engine-This will allow the contaminates to mix and to suspend in the oil. Remove the dipstick. Note: If you can't hold the dipstick. comfortably in your hands, then the oil is too hot! Wait for the oil to cool off a bit

2) Select and insert the appropriate diameter extraction tube into the dipstick pipe until it touches the bottom of the oil pan. Connect the main tube to the top of the unit and to the extraction tube.

3) Pump the handle 4 to 10 times in a row to start the vacuum. The unit will extract the oil automatically. Continuous pumping is not required.

4) After all the oil has been extracted, press the release valve located at the top of the unit for 5 seconds. Remove the main tube. When pouring the oil into a container, hold the pump and pour gently. Do not hold it upside down ! Bring the used oil to a recycling depot.