Key Features

3 year guarantee
2.6 bar pressure
Suitable for positive head applications
High quality, high performing plastic pump supplied with 15 mm flexible hoses with integral ISO valves
Quiet operation
WRAS approved product
Continuously rated
Anti-vibration feet
EPDM/PTFE/Al. Oxide seal
Pre-wired with 1.5 metre power cable






Technical Specification
Product Code	46431
General
Guarantee	3 years
WRAS approval	1709101
Approvals	WRAS, CE
Features
Pump type	Peripheral
Pump control	Flow Switch
Mechanical seal	EPDM / PTFE / Al. Oxide
Anti-vibration feet
Flexible hoses	4
Dry run protection
Typical noise	56 dB(A)
Materials
Pump body	Plastic
Impeller	Plastic
Performance
Maximum head - closed valve	2.6 bar / 26 metres
Performance @ 9 l/min	1.9 bar
Performance @ 18 l/min	1.3 bar
Maximum flow	36 l/min
Maximum static inlet pressure	13 metres
Maximum working pressure*	380 kPa / 3.8 bar
Maximum ambient air temperature	40 °C
Min / Max water temperature**	Min 4 °C / Max 65 °C
Flow switch sensitivity	0.8 l/min (approx)
Connections
Pump connections (Inlet)	G ¾ M
Pump connections (Outlet)	G ¾ M
Flexible hoses
Connections	G ¾ female x 15 mm push-in x 200 mm long Isolating valves on inlet hoses
Motor
Type	Induction, auto-reset thermal trip
Duty rating	Continuous (S1) @ 9 l/min and above***
Electrical
Power supply (Vac/Ph/Hz)	230 V a.c. / 1 / 50 Hz
Power consumption - P1	505 Watts
Current - full load	2.2 Amps
Fuse rating	5 Amps
Power cable length	1.5 metres (pre-wired)
Physical
Enclosure protection	IP22
Length	319 mm
Width	132 mm
Height - excluding hoses	179 mm
Weight - including fittings	5.4 Kg
GTIN 13 DIGIT	5050400464310
*	The maximum pressure that can be applied to the pump under any installation conditions.
**	A stored water temperature of 60 oC is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.
***	Both heads pumping 4.5 l/min and above.