12 Way Choc Block Connector Strips

Connector Strip 12 Way Choc Blocks, Terminal Strips comes in blocks of 12 and conforms to all BS electrical Standards. 

A safe and simple solution to protect and insulate electrical connections
These easy break terminal strips make life simpler for
installers to create the exact number of poles required
without having to use cutting tools when connecting
copper conductors.
• Easily snapped into the required number of poles
• No remaining burrs
• No tools needed to cut to length
• Save time and money
• Supplied in strips of 12-poles
• Four sizes available encompassing insert sizes 
• Standard insert is nickel-plated brass with zinc-plated
steel screws

High Strength & Non-Flammable

Acid & Erosion Control

Insulate Well & Not Apt to Age

400V High Voltage

• Screws are supplied in open position
• Continuous working temperature range is –30°C to
+110°C

all of our Products have FREE P+P with same day Postage.

GENERAL ELECTRICAL

CONNECTION PROCEDURE

 
Always isolate mains supply from accessory by switching off at consumer unit.
Remove accessory from wall box by extracting retaining screws.
Using an electrical tester make sure no mains voltage is present with in the accessory plate.
Dissconnect accessory taking note of there respective connections
Reconnect accessory plate.
Re fix to wall box making sure not to trap cables beneath the fixing plate screws.
Switch on the mains supply at consumer unit checking the operation of the accessory.

 

IF IN DOUBT CONSULT A QUALIFIED ELECTRICIAN.

1,000s Available only showing a limited amount to stay withing listing allowance

also available on our website

Full V.A.T Receipt Included