| Specifications | Color
Communications
Connectivity
| Connectivity, standard | 1 HP Jetdirect Fast Ethernet embedded print server, 1 Foreign Interface Harness (FIH), 1 Hi-Speed USB 2.0 port, 1 Host USB 2.0 port, 1 EIO slot, 1 analog fax port | | Wireless capability | Optional, enabled with purchase of a hardware accessory | | Connectivity, optional | HP Jetdirect Print Servers and HP Secure High Performance Hard Disk Drives. For more information on available HP networking solutions visit http://www.hp.com/go/jetdirect |
Copying
| Copier smart software features | Up to A3 capable copying on the glass and through the automatic document feeder, 50-page ADF, duplexing (optional), reduce/enlarge, contrast adjustments, mixed originals support, stapling on XS-bundle | | First copy out (letter) | 12 sec | | Bottom copy margin | 6 mm | | Copy margin left | 5 mm | | Copy margin right | 5 mm | | Copy margin top | 6 mm | | Copier settings | Sides, staple collate, image adjustment, reduce/enlarge, paper selection, content orientation, output bin, pages per sheet, booklet format, optimize text/picture, original size, job build, edge to edge | | Copies, maximum | Up to 1000 copies | | Copier scaling (ADF) | 25 to 400% | | Copy reduce / enlarge settings | 25 to 400% | | Copy resolution (black graphics) | Up to 600 x 600 dpi | | Copy resolution (black text) | Up to 600 x 600 dpi | | Copy speed black (best, letter) | Up to 35 cpm | | Copy speed black (best, A4) | Up to 35 cpm | | Copy speed note | Copy speed specifications are based on long-edge feed (landscape) scanning through the ADF. |
Digital sending
| Control panel | 4 job control buttons, 13 button numeric keypad, touch-screen graphical display, 3 status lights, 1 display contrast knob | | Digital sending optional features | Digital sending software, HP Autostore | | Digital sending standard features | Send-to-network folder, LDAP & SMTP authentication, LDAP addressing | | Feed speed black (letter) | Up to 35 ppm | | Feed speed color (letter) | Up to 23 ppm | | File formats | PDF, JPG, TIFF, MTIFF |
Faxing
| Fax memory | Dependent on available hard disk space | | Fax memory | Dependent on available hard disk space | | Memory footnote | Dependent on available hard disk space | | Fax resolution | Up to 300 x 300 dpi | | Fax resolution black | 200 x 200 dpi | | Resolution (black photo grayscale) | 200 x 200 dpi | | Fax resolution (photo) | 200 x 200 dpi | | Resolution (black and white, standard mode) | 200 x 200 dpi | | Resolution (black and white, superfine mode) | 300 x 300 dpi | | Fax note | Based on standard ITU-T test image #1 at standard resolution. More complicated pages or higher resolution will take longer and use more memory. | | Auto fax reduction supported | Yes | | Auto redial | Yes | | Faxing | Yes | | Fax delayed sending | No | | Distinctive ring detection supported | No | | Broadcast locations | 100 | | Fax forwarding | Yes | | Fax phone TAM interface supported | No | | Polling | Yes | | Fax telephone mode supported | Yes | | Junk fax barrier | Yes | | Speed dials, maximum number | Up to 100 numbers | | PC interface supported | Yes, Windows fax driver, HP PC Send Fax Driver 2.0 | | Remote retrieval | Yes | | Modem speed | Data and faxes transfer rates up to 36.6 kbps, HP PC Send Fax Driver |
Media handling
| Duplex binding | No | | Duplex printing | Automatic (standard) | | Recommended media weight (duplex) | 16 to 32 lb | | Recommended media weight (duplex) | 60 to 120 g/m² | | Standard media sizes (duplex) | A3, A4 (L), A5, B4, B5 | | Recommended monthly page volume note | HP recommends that the number of printed pages per month be within the stated range for optimum device performance, based on factors including supplies replacement intervals and device life over an extended warranty period. | | Recommended monthly page volume | 3000 to 12,500 | | Duty cycle note | Duty cycle is defined as the maximum number of pages per month of imaged output. This value provides a comparison of product robustness in relation to other HP LaserJet or HP Color LaserJet devices, and enables appropriate deployment of printers and MFPs | | Duty cycle (monthly, letter) | Up to 200,000 pages | | Duty cycle (monthly, A4) | Up to 200,000 pages | | Envelope input capacity | Up to 10 envelopes | | Maximum input capacity (sheets) | Up to 2100 sheets | | Input capacity | Up to 2100 sheets | | Maximum output capacity (sheets) | Up to 750 sheets (with stapler/stacker) | | Output capacity | Up to 750 sheets (with stapler/stacker) | | Standard media sizes (duplex, imperial) | Executive, letter, legal, ledger | | Paper sizes supported (ADF) | Letter, legal, ledger, A4, A5, A3 | | Automatic document feeder capacity | Standard, 50 sheets | | Paper trays, maximum | 6 | | Paper trays, standard | 6 | | Envelope feeder | No | | Media size, tray 1 | 3 x 5-in postcards, A5, A4, A3, B4, B5, EXE, LTR, LGL, LGR, 76 x 127 mm to 312 x 469.9 mm | | Media size, tray 2 | A4-L, B4-P, B5-L, LTR-L, LGL-P, EXE-L, A5-L, 8.5 x 13 in | | Media size, tray 3 | A4-L, B4-P, B5-L, LTR-L, LGL-P, EXE-L, A5-L, A3-P, LGR-P, 8.5 x 13 in | | Finished output handling | Sheetfed | | Media types | Paper (plain, inkjet, photo, banner), envelopes, labels, cards (index, greeting), transparencies | | Paper handling input, standard | Two 250-sheet input trays standard, 100-sheet multipurpose tray, three 500-sheet input trays | | Paper handling output, standard | 250-sheet output bin, 30-sheet automatic stapler/stacker with 500- sheet output bin | | Media sizes supported | Executive, letter, legal, ledger | | Media sizes supported | A4-L, B4-P, B5-L, A5-L, A3-P | | Media type and capacity, tray 1 | Sheets: 100, envelopes: 10 | | Media type and capacity, tray 2 | Sheets: 250 | | Media type and capacity, tray 3 | Sheets: 250 | | Supported media weight | Tray 1: 16 to 53 lb, Additional input trays and output finishing devices: 16 to 32 lb, Automatic document feeder: 16 to 32 lb | | Media weights by paper path | Tray 1: 60 to 199 g/m² , Additional input trays and output finishing devices: 60 to 120 g/m² , Automatic document feeder: 60 to 120 g/m² | | Media weights, recommended | 60 to 120 g/m² | | Media weight, tray 1 | 16 to 53 lb | | Media weight, tray 2 | 16 to 32 lb | | Media weight, tray 3 | 16 to 32 lb | | Media weight (tray 1) | 60 to 199 g/m² | | Media weight (tray 2) | 60 to 120 g/m2 (cut sheet paper) | | Media weight (tray 3) | 60 to 120 g/m2 (cut sheet paper) |
Memory
| Memory, maximum | 512 MB | | Memory, standard | 256 MB | | Memory technology | Memory Enhancement technology (MEt) | | Memory slots | 1 DDR DIMM slot (100-pin) | | Memory upgrade | Expandable to 512 MB through one 100-pin DDR DIMM slot |
Multifunction
| Functions | Print, copy, send-to email/network folder, fax, advanced paper handling (stapler/stacker) | | AIO multitasking supported | Yes |
Networking
| Network capabilities | Yes, via HP Jetdirect embedded networking, optional HP Jetdirect internal print servers, HP Jetdirect external print servers, HP wireless print servers, and HP connectivity cards | | Network ready | Standard |
Ports
| Ports | 1 Hi-Speed USB 2.0, 1 LAN, 1 EIO, 1 FIH, 1 Host USB 2.0, 1 Analog Fax |
Power
| Power consumption (active) | 600 watts | | Power consumption (active, copy or scan) | 640 watts | | Power consumption footnote | Power requirements are based on the country/region where the printer is sold. Do not convert operating voltages. This will damage the printer and void the product warranty. | | Power consumption | 600 watts (printing), 640 watts (copying), 80 watts (ready), 21 watts (sleep), 0.1 watts (off) | | Power consumption (manual-off) | 0.1 watts | | Power consumption (sleep) | 21 watts | | Power consumption (standby) | 80 watts | | Typical electricity consumption (TEC) number | 5.975 kWh/Week | | Power | Input voltage: 115 to 127 VAC (+/- 10%), 60 Hz (+/- 2 Hz), 12 amp, 220 to 240 VAC (+/- 10%), 50 Hz (+/- 2 Hz), 6 amp | | Power supply type | Built-in power supply, either 110 or 200 volt |
Printing
| Printer smart software features | Up to A3 capable printing, full LaserJet printing functionality, HP ProRes 1200 at full engine speed, duplexing available, Instant-on Technology, HP Smart printing technology | | Number of print cartridges | 1 | | SureSupply note | HP SureSupply alerts you when your print cartridge is running low and helps you purchase online or locally through HP or a participating retailer. For more information, visit http://www.hp.com/go/SureSupply, only available with Original HP supplies, Internet access required. | | SureSupply supported | Yes | | Economical printing | Economode (saves up to 50% toner from 600 dpi), immediate return to Power safe mode after each print job due to Instant-on fuser technology (saves electricity), optional automatic two-sided printing and N-up printing (saves paper) | | Print colours | No | | Print languages | PostScript Level 3 emulation, PCL 5, PCL 6, PDF 1.4 | | Print quality black (best) | Up to 1200 x 1200 dpi | | Print quality black (draft) | Up to 600 x 600 dpi | | Print quality black (normal) | Up to 600 x 600 dpi | | Resolution technology | HP ProRes 1200, HP FastRes 1200, 600 dpi, 170 lpi | | Print speed footnote | Print speed may slow down on large jobs using letter/landscape and ledger-sized paper. The degree of speed reduction will depend upon paper weight and fuser mode, and is determined by the maximum allowable fuser temperature. | | Print speed black (normal, letter) | Up to 35 ppm | | Print speed black (normal, A3) | Up to 18 ppm | | Print speed black (normal, A4) | Up to 35 ppm | | Fonts and typefaces | 80 scalable TrueType fonts | | Print technology | Laser | | First page out black (letter, ready) | As fast as 8 sec | | First page out black (letter, sleep) | As fast as 18 sec | | First page out black (A4, ready) | As fast as 8 sec | | Printer management | HP Web Jetadmin, HP Easy Printer Care Software (neither is shipped in box) | | Memory card compatibility | HP 64 MB 100-pin DDR DIMM Q7715A, HP 128 MB 100-pin DDR DIMM Q7718A, HP 256 MB 100-pin DDR DIMM Q7719A, HP 512 MB 100-pin DDR DIMM Q7720A | | Bottom margin (A4) | 2 mm | | Left margin (A4) | 2 mm | | Right margin (A4) | 2 mm | | Top margin (A4) | 2 mm | | Maximum print area | 307.9 x 465.9 mm | | Warm-up time | 158 sec | | Supported network protocols | IPv6: DHCPv6, HTTP, HTTPS, Port 9100, LPD, IIP, Secure IIP, MLDv6, ICMPv6, IPv4: FTP, IPP, Secure IPP, Auto-IP, Apple Bonjour compatible, Telnet, SLP, IGVPv2, BOOTP/DHCP, WINS, SNMPv1/v2c/v3, TFTP, HTTP, HTTPS, Port9100, LPD, Other: IPX/SPX, DLC, LLC, Apple |
Processor
| Processor | MIPS embedded in HP Custom ASIC | | Processor speed | 460 MHz |
Scanning
| Scanner advanced features | Color scanning of up to A3-size documents, 50-page ADF | | Scan input modes | Front-panel scan, copy, fax, e-mail, ADF | | Enhanced scanning resolution | Up to 1200 dpi | | Hardware scanning resolution | Up to 600 x 600 dpi | | Scan resolution, optical | Up to 600 dpi | | Scanner type | Flatbed, ADF | | Scan size (ADF), maximum | 11 x 17 in | | Scan size (ADF), maximum | 297 x 432 mm | | Scan size ADF (minimum) | 5.43 x 8.27 in | | Scan size ADF (minimum) | 138 x 210 mm | | Scan size (flatbed), maximum | 11 x 17 in | | Scan size (flatbed), maximum | 297 x 432 mm | | Scan size flatbed (minimum) | 8.5 x 11 in | | Scan size flatbed (minimum) | 215.9 x 279.4 mm | | Scan speed footnote | Scan speeds apply for simplex only, duplex speed is reduced | | Scan speed black (normal) | Up to 35 ppm | | Scan speed color (normal) | Up to 23 ppm | | Color scanning | Yes | | Levels of grayscale | 256 |
Software
| Downloadable software | Printing system, PCL 5 driver only, PCL 6 driver only, PS driver only, WJA applet, UPD PCL 5, UPD PS, HP Easy Printer Care Software, PC fax driver | | Compatible operating systems | Microsoft® Windows® 7, Windows® XP Professional x64, Windows® XP Professional, Windows® XP Home, Windows® Server 2003, Windows® 2000, Mac OS X v 10.2.8, 10.3, 10.4, 10.5, 10.6, Linux (see http://www.hplip.net) | | Driver updates | The latest software and drivers are available for the HP LaserJet M5035 MFP from the HP Website at http://www.hp.com/support/ljm5035mfp |
Storage
System
| Security | Private print, HP Secure Storage Erase, network authentication (LDAP SMTP), HP Jetdirect (802.1x) for wired networks, SNMPv3 and HTTPS, and Secure IPP (IPP-S) and IPsec | | Minimum system requirements | Microsoft® Windows® 7 ready. For more information go to http://www.hp.com/go/windows7. Some features may not be available. 133 MHz processor or higher, 64 MB RAM, 40 MB available hard disk space, USB or network port | | Minimum system requirements for Macintosh | Mac OS X v10.2.8, 10.3, 10.4, 10.5, 10.6, 128 MB RAM, 25 MB available hard disk space, network or USB port | | Upgradability | DSS for additional sending capabilities |
Environmental information
| Recommended operating temperature range | 63 to 77° F | | Acoustic pressure emissions bystander (active, printing) | 51 dB(A) | | Acoustic power emissions | 6.6 B(A) (printing at 35 ppm) | | Acoustic power note | Configuration tested: base model, simplex printing, A4 paper at an average of 35 ppm | | Operating altitude (imperial) | 10000 ft | | Storage humidity | 20 to 80% RH |
Compliance information
| Electromagnetic compatibility | CISPR 22:1993/EN 55022:1994 Class A, EN 61000-3-2:2000, EN 61000-3-3:1995, EN 55024:1998, FCC Title 47 CFR, Part 15 Class B/ICES-003, Issue 4/GB9254-1998, GB17625.1-2003, EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC, and carries the CE-Marking accordingly | | Energy efficiency | ENERGY STAR® qualified | | ENERGY STAR® qualified | Yes | | Telecom compliance (fax capability) | Telecom: TBR-21:1998, EG 201 121:1998, FCC Part 68, Industry Canada CS03, NOM-151-SCTI-1999 (Mexico), PTC-200 (New Zealand), AS/ACIF S002:2001 (Australia), IDA PSTN1 (Singapore), TPS002-01 (Malaysia), IG 0005-11 (Taiwan), HKTA 2011 (Hong Kong), YD514, YD/T589, YD703, GB3382 (China) | | Safety | Argentina (TUV S Mark-Rs.92/98/Ds.1009/98), Australia (AS/NZ 3260), Canada (cUL-CAN/CSA C22.2 No. 60950-1-03), China (GB4943), Czech Republic (CSN-IEC 60950-1, IEC 60825-1), Estonia (EEI-EN60950-1, IEC 60825-1), EU (CE Mark-Low Voltage Directive 73/23/EEC), Germany (TUV-EN60950-1, IEC 60825-1), Hungary (MEEI-IEC 60950-1, IEC 60825-1), Lithuania (LS-IEC 60950-1, IEC 60825-1), (Russia (GOST-R50377), Slovakia (IEC 60950-1, IEC60825-1), Slovenia (SQI-IEC 60950-1, EN60825-1), South Africa (IEC 60950-1, IEC60825-1), US (UL-UL 60950-1, FDA-21 CFR Chapter 1 Subchapter J for lasers), Class 1 Laser/LED Product |
|