WHICH MEANS THEY WILL OUT LAST YOUR BOAT & WONT LEAVE ORANGE/RUST STAINS RUNNING DOWN THE SIDE OF THE CABIN LIKE THE CHEAP CHINESE COPIES.

ONCE PROPERLY SECURED IT WILL TAKE THREE ROD/REEL SET-UPS RIGHT UP TO HEAVY BIG GAME OUTFITS for TUNA & THE LIKE.

THERE IS A SINGLE BAR RUNNING THROUGH ALL THREE TUBES TO STOP THE RODS FALLING THROUGH & RESTING ON THE REELS, WHICH WHEN UNDER WAY COULD/WOULD CHEW UP THE REEL BODY & CAN ALSO DAMAGE THE LINE.

 

THE BAR HOLDS THE RODS AT THE RIGHT HEIGHT SO THEY DON'T GET DAMAGED. 

THIS BAR WILL ALSO LOCK IN PLACE RODS WITH A "GIMBLE" BUTT, STOPPING THE HEAVER BIG GAME RODS WITH REELS TWISTING IN THE RACK & HITTING EACH OTHER OR BANGING ON THE SIDE OF THE CABIN/BULKHEAD.

Specs/measurements:-

THIS RACK HAS A TOTAL WIDTH OF 53CM FROM SIDE TO SIDE.

THE TWO OUTER SCREW HOLES ARE 50CM APART MAX, WITH TWO MORE IN-BETWEEN TOTALING (4 IN NUMBER) FOR A SECURE FIXING.

THEY WILL TAKE BOLTS/SCREWS UP-TO 6MM IN DIAMETER (you can of course make the holes bigger yourself if you wish) & AS THE MOUNTING BAR IS MADE FROM 25MM X 5MM 316 MARINE GRADE STAINLESS STEEL "IF" YOU INCREASE THE SIZE OF THE MOUNTING HOLES, THEY WILL NOT RUST WHERE YOU HAVE DRILLED.

  

THE TUBES ARE HAND "TIG"WELDED TO THE MOUNTING BAR & ARE 19.5CM TALL WITH A INNER DIAMETER OF 42MM TO ACCOMMODATE BUTTS UP TO 41MM IN DIAMETER.(For example big game bent buts)

 

THEY ARE CUT FROM 45MM "OD" X 1.5MM WALLED TUBE WITH THE TOP END SWAGED OUT TO 52MM TO GIVE A "FUNNEL AFFECT" TO AIDE ROD PLACEMENT.

These rod racks can also be used to store rods at home in your garage/man cave.

 

THE WHOLE THING WEIGHS IN AT JUST UNDER 1.2 KG

IF YOU WANT MORE THAN ONE MESSAGE US BEFORE PAYING. 

PUT THEM IN YOUR BASKET TO RESERVE THEM, MESSAGE US & WE WILL SEND YOU A PAYPAL INVOICE WITH CORRECTED POSTAGE.(as ebay has funny Ideas about postage on multiple items)