Trend Door Hinge Jig Package H/JIG/A/DEAL
c/w 2 piece hinge jig, corner chisel* and router cutter

 

The 2 piece Contractor Hinge Jig is designed for recessing hinges in wooden doors & frames with plunge router.

 

Key Features:

  • It is easy to use with minimal setting-up time, completing the job both accurately & quickly.
  • Used on-site & in joinery shops to increase productivity with excellent results.
  • Four apertures for fire door requirements.
  • No need for marking out in the conventional way.
  • Quick & simple to set-up as the hinge is used as the pattern.
  • Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges.
  • Use with a light duty plunge router with 1/4 inch collet.
  • Long reach router cutter required, 12mm diameter with 70mm overall length.
  • Angled position slots to prevent creep.
  • Unibase may be needed.
  • Patent No. GB2285410.
  • T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160.


Specification:

Description

 Metric & Imperial Conversion
   
Hinge sizes possible  
Length min. 2-5/8" (67mm)
Length max. 5" (127 mm)
Width min. 3/8" (9.5 mm)
Width max. 1-3/8" (35 mm)
Width max. in 35mm rebate 20mm
Width max. in 44mm rebate 30mm
   
Door sizes possible  
Height min. 6' 5" (1956 mm)
Height max. 6' 10" (2100 mm)*
Thickness min. 5/8" (16 mm)
Thickness max. 2" (51 mm)

* Please note for doors over 2040mm the botton hinge will be higher than 9" up.

 

Trend Hinge Jig / Hinge Recessing Jig is supplied with:

  • 4 x Apertures
  • 4 X Bradawls with spacer
  • 1 X 16mm guide bush
  • 1 X T-handle hex key
  • 1 X 4mm spacing gauge
  • 1 X Fabric storage case with H/JIG/A

 

Trend H/JIG/A Manual

 

Replacement Parts

Description

Product Reference
1. Special guide bush (dia. 16mm x 10mm) GB160
2. Bradawl (requires spacer) WP-HJ/09
3. Nylon spacer for bradawl (1 off) WP-HJ/08
4. 4mm feeler gauge (1 off) WP/HJ/10
5. Aperture block (1 off) WP-HJ/02
6. T-handle hex key (1 off) WP-AKT/01
7. Plastic storage tube (for HINGE/JIG) CASE/HJ
8. Fabric carry case (for J/JIG/A) CASE/HJ/A

 

Trend One Piece Hinge Jig

Trend Skeleton Hinge Jig

Trend Lock Jig

 

 

 

 

 

 

You may notice a change in pricing to some of our items like Saw Blades , Bandsaw Blades and other Bladed Items.
This is due to Ebay's Bladed Items policy and is designed to reduce knife and bladed item crime in the UK and to protect the Ebay community. 
We apologise for any increase in costs where we are required to send items using an Age Verification Service.

 

Delivery surcharges may apply to the following areas based upon item, size and weight. If you are unsure please contact us.

It is not possible to account for every possibility at the checkout and where we can we will use Royal Mail 48hr Tracked but for items over 60cm (90cm tubes) and 2kg we are unable to use this service

Please message us to enquire based upon your location prior to ordering your item. We keep the cost to the minimum charged to us.

Where contact has not been made prior to ordering we will make contact to confirm delivery cost if any on receipt of your order.

Postal areas affected by surcharges are

Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands, Northern Ireland, Republic of Ireland. Others areas may be affected due to size and shipping method.