Surge Diverter (arrester) 1P for Distribution boards Class II / T2 / C, 40kA 280V - IS010446
Surge Diverter / Surge Arrester Testclass II / T2 / C/ for overvoltage protection of voltage spikes with wavefrom 8/20 micro seconds. Suitable for installation in distribution boards and load centres.
Sure arresters Class T2 are not suitable for protection from direct lighting strikes.Where direct lighting strikes can occur onto supplying overhead conducturs it is recommended to use Lighting arrester Testclass II / T2 / B.
SPECIFICATIONS:
Number of poles: 1
Arrester class: Testclass II (C) IEC61643-1+A1/EN61643-11
Max. continuous rating voltage Uc: 280V AC
Max. discharge current (8/20)Iimax: 40 kA
Nominal discharge current (8/20)In: 20 kA
Protection level Up (at in): 1400 V
Response time: < 25 ns
Charge at in: 0,57As
Specific energy at In: 5,7kJ/Ω
Thermal disconnection: Yes
Back up fuse: up to 125A
Short circuit withstand current: 50kAeff / 50hz
Temperature range: -40°c - +70°c
Degree of protection: IP40 (mounted)
Terminal cross section: 4 – 25mm²
Tightening torque: 2,4 – 3Nm
Dimensions [mm]: 17,5 x 45 x 80
COUNTRY OF ORIGIN:
Romania (European Union)
Industrial & Modular Contactors
Light Indicators (Pilot lights)
Data sheet:
https://image.schrack.com/datenblaetter/h_is010446--_en.pdf
CAD drawing:
https://image.schrack.com/caddrawing_expanded/c_is010446--_e.dwg
We accept returns within 14 days only if the product is in original undamaged packaging and has not been used (energised).
Refunds for products with marks or scratches on body or terminals will not be proceeded.
