Siser roll size is metric measured 
roll height is 11.875"
roll length is 5 feet


Cricut®:

Blade: Standard
Setting: Iron-on



______________________________

                                                                                      


Silhouette Cameo:

Blade: Standard, 3
Setting: Heat Transfer Material (smooth)
Speed: 8
Thickness: 6






Cutting Settings

Scan N Cut:

Blade: 2
Cut Speed: 1
Cut Pressure: 1




Roland GS/GX-24:

Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s



Graphtec:

Blade: 45°
Gram Force: 8-9
Tool: CB09U+0
Speed: 30 cm/s



Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold



_________________________________________________________________________



  • Roll size is 12" (11.875 measured height) x 60", all roll stock will measure +/- .25" in both height and length. 



Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold





_________________________________________________________________