Thumb Grab to suit machines from 1.5t - 2.5t with  600mm fork. It is important to match the fork size to bucket to get the best performance. If you machine has a Q hitch fitted then you must measure with the bucket attached to the Q hitch. If in doubt contact us to make sure we supply the right size for your machine. We have many different sizes of grabs spanning 0.75t - 40t hydraulic and manual to make sure your grab fits your machine and works as effectively as possible.

See our other listing for the root ripper and other attachments or contact us.

All RSL micro and mini grabs forks are made from 12.5mm (1/2inch) steel. All RSL grabs are fully tested and are provided with fitting, care and best usage instructions and have a CE declaration of conformity. 

Use with your normal buckets, the grab has multi adjustment points so there's a position to grab most objects. The thumb will also fold back when not in use and the fork and support arm stays on the grab and does not need to be stored in a separate location unlike other grabs on the market. The RSL Thumb Grab excels at logging work/ brash and waste clearance and lifting trunks to be cut by chainsaw away from the ground so will save sharpening chainsaw chains and backache. The grab will also reduce labour costs, where you may get off the digger or use a second person to break up or lift oversize objects i.e. Digging out old foundations that do not fit into a normal mini bucket, can then be achieved by the one person staying on the digger equipped with a thumb grab and no break in productivity.  For a small outlay this grab will be around to help you out for a long time and is there when you need it!

Adjustment and removal is via pin and lynch pin. By having these two pins the grab can be removed in seconds just leaving the main foot welded to the dipper.
The grab is very simple to fit, just weld the item onto the end of your dipper arm (best placement instructions included). 

Once you have one of these you will wonder how you did without! All our products are heavy duty and made in our facilities from quality materials. We have spent a lot of time and money developing these and believe we have the best product available for heavy use grab work.
Will post worldwide please contact us with your location and we will get a price to get the item couriered to you.
This advert is for the thumb grab only.  The pictures showing the RSL "Root Ripper Tine"  and "Half Clamshell"  and the "Top Jaw"  are extras as shown below.
Optional extras (please contact for pricing)