Window Closure Module for car alarm with central locking

Convert your alarm or remote central locking system to a total closure system  that will automatically close the windows when the alarm is armed or remote  lock. This kit is designed to close 2 or 4 windows. This window closure  module works with your car alarm with central locking system OR Original Remote  control of vehicle to close your electric windows automatically when you arm  your alarm or remote lock. No need to close your windows when parking, just turn  the car alarm or remote keyless on and the windows will close (rollup)  automatically. Works with Negative or Positive trigger input (Your alarm or  remote keyless entry system should provide either positive or negative trigger  output!).
 

 Standard Features:

  • Window Closure Module for any car alarm with a window closure output or positive/negative central locking
  • Window roll up automatically
  • Compatible with car alarm system
  • Will close 2 or 4 electric windows
  • Negative or positive trigger input
  • Universal Trigger Output
  • Auto-senses when the window is fully closed
  • Safety System stops windows if you put pressure on the window during operation

 Package Contents:
  • Control Unit
  • Wirings 
  • Instruction (Function Description - Wiring Description - Wiring Diagrams)

 



Notes *
Note 1. Central Locking
If your central locking system only operates from the drivers door key (not the passengers);
then you will need a   2 wire motor for your drivers door.
 
Note 2. Total Closure / Window Closure
If your vehicle has total closure this kit will close the windows without any additional interfaces.
You can tell if your vehicle has total closure if the windows close when you hold the drivers door key in the locked position.
If you don’t have total closure and want to close the windows when the alarm is armed;
then you will need a  window closure module.

Note 3. Boot Release Wire: Trunk  Release Output
Some cars have an electric boot release or one can be added. This can be  interfaced with this kit.
For cars with a built in boot release the wire is  found at the keyless entry module under the dash
or behind a kick panel. If  you want to Convert your manual boot release to electric release;
then you  will need a  Electric Boot Release Kit 

 

Note 4. Cable operated door locks
For vehicles with cable operated door locks, such as Ford, Mercedes  Sprinter/Vito, and some newer cars, You need this additional item:  Allows aftermarket actuators to work with cable door lock systems

  Cable door lock adaptor