Honda VT750C Shadow 83/85 (ME9) Piston Ring Sets (2) STD / 79.50mm
This product data sheet is originally written in English.
Honda VT750 / VT750C Shadow (ME9) 1983–1985 — Piston Ring Sets (2) — STD / 79.50mm — 13011-ME9-004
A matched pair of piston ring sets for the VT750C Shadow V-twin — one set per cylinder. Standard size, so no rebore is needed if your pistons and bores are still on size. If the pistons are good but the engine is smoking or down on compression, fresh rings are the cheaper way back to health.
WHAT'S INCLUDED
- 2 x Piston Ring Sets — 79.50mm STD
- One set per cylinder — enough for the full V-twin
- Pistons, pins and circlips are NOT included — rings only
SPECIFICATION
- Reference OE/OEM Number: 13011-ME9-004
- Manufacturer Part Number: R16014-00
- Model code: ME9
- Size: STD / 79.50mm (standard — no rebore required)
- Piston Diameter: 79.50mm
- Cylinder Bore Diameter: 79.50mm
- Engine Type: 4-stroke V-twin
- Years: 1983 to 1985
- Quantity: 2 ring sets (full engine set)
- Brand: IMD
- Condition: New
FITMENT
Honda VT750 / VT750C Shadow (ME9), 1983 to 1985.
This same ME9 ring set also fits the VT800C Shadow (needs 2) and the VF1100S V65 Sabre (needs 4) — see our other listings.
Where possible, all parts are listed by part number (O.E.M.). Check your model code and measure your pistons before ordering.
SIZE CHECK
This is a STANDARD size ring set for a 79.50mm bore. It will not fit an engine that has already been bored oversize. Buyer is responsible for confirming the correct size and fitment for their engine.
Fitting should be carried out by a competent engineer. No liability can be accepted for parts incorrectly fitted, or for any failure of such parts after fitting.
POSTAGE & RETURNS
- Dispatched from Chester, United Kingdom within 1 working day of cleared payment
- Royal Mail International Tracked
- 30-day returns accepted — buyer pays return postage
- Buyer is responsible for any import duties, taxes or customs charges in the destination country
Correct rings for the VT750C Shadow are getting hard to find — ideal for a Shadow engine rebuild or top-end refresh.
A matched pair of piston ring sets for the VT750C Shadow V-twin — one set per cylinder. Standard size, so no rebore is needed if your pistons and bores are still on size. If the pistons are good but the engine is smoking or down on compression, fresh rings are the cheaper way back to health. This same ME9 ring set also fits the VT800C Shadow (needs 2) and the VF1100S V65 Sabre (needs 4) — see our other listings. Where possible, all parts are listed by part number (O.E.M.). Check your model code and measure your pistons before ordering. This is a STANDARD size ring set for a 79.50mm bore. It will not fit an engine that has already been bored oversize. Buyer is responsible for confirming the correct size and fitment for their engine. Fitting should be carried out by a competent engineer. No