Driver Seat Foam Fit for Dodge Ram 1500 2500 3500 4500 5500 - 2006-2010，Driver Side Bottom Seat Foam Cushion Pad Replacement，#5180021AA, 05180021AA,Lower Seat Pad
Product Description
【Replacement Driver Seat FOAM Cushion — Replaces Part# 5180021AA/05180021AA — Fit For Dodge Ram 1500/2500/3500/4500/5500 2006-2009】This is the FOAM PAD ONLY (the sponge/cushion under your seat cover leather). This is NOT a seat cover. If your driver seat feels flat, saggy, or bottomed-out after many years of use, this foam replacement restores the original cushioning. Direct replacement for Part# 5180021AA. Fits ALL Ram 2006-2009: 1500, 2500, 3500, 4500, 5500 All cab types Heated & non-heated Power & manual seats Without Occupant Classification System.
【High-Density Foam — Restores Your Flat, Compressed Driver Seat to Like-New Firmness & Comfort】 After 150K-300K miles, your original seat foam compresses and breaks down — you can feel the metal springs through the cushion, your back aches on long drives, and the driver seat sits noticeably lower than the passenger side. Our high-density foam replacement is molded to the exact shape and provides: ① Factory-equivalent firmness and support ② Proper cushioning that eliminates spring poke-through ③ Correct seat height (no more sitting 2" lower than new) ④ Good breathability for hot climate comfort.
【Installation: Remove Seat, Strip Old Foam, Drop In New Foam — 45-60 Minutes DIY】 Steps: ① Unbolt driver seat from floor (4 bolts, 14mm-18mm) ② Disconnect electrical (heated/power if equipped) ③ Remove the leather/cloth seat cover from the frame ④ Remove old compressed foam ⑤ Place new foam cushion on frame ⑥ Reinstall seat cover over new foam ⑦ Reinstall seat. You'll need: socket set, flathead screwdriver, trim tools. Pro tip: take photos before disassembly for reference. Video guide available on request. Important: compare new foam to old foam shape BEFORE installing to confirm exact match.
【Your 2006-2009 Ram is Worth Fixing — New Foam Costs a Fraction of a New Seat or New Truck】 Options for fixing a flat driver seat: ① New complete seat from dealer/junkyard ② Aftermarket foam from us: fraction of the cost ③ Do nothing: back pain, poor driving posture, faster fatigue on long hauls. If you're keeping your 3rd-gen Ram (and with 5.9L Cummins values going UP, most of you are), new seat foam is the highest-comfort-ROI upgrade you can make. 5 minutes into your first drive on new foam, you'll wonder why you waited so long.
【Important: Verify Fit BEFORE Installing — Compare Shape to Your Old Foam】 This foam fits Driver Side Bottom (front) for Ram 1500-5500 2006-2009 WITHOUT Occupant Classification System. Crucial step: Before discarding your old foam, place the new one next to it and compare shape, size, and mounting points. If anything doesn't match, contact us BEFORE proceeding. Not compatible with: Ram 2002-2005 (different shape), Ram 2010+ (may differ — verify), or models WITH Occupant Classification System sensor.
【High-Density Foam — Restores Your Flat, Compressed Driver Seat to Like-New Firmness & Comfort】 After 150K-300K miles, your original seat foam compresses and breaks down — you can feel the metal springs through the cushion, your back aches on long drives, and the driver seat sits noticeably lower than the passenger side. Our high-density foam replacement is molded to the exact shape and provides: ① Factory-equivalent firmness and support ② Proper cushioning that eliminates spring poke-through ③ Correct seat height (no more sitting 2" lower than new) ④ Good breathability for hot climate comfort.
【Installation: Remove Seat, Strip Old Foam, Drop In New Foam — 45-60 Minutes DIY】 Steps: ① Unbolt driver seat from floor (4 bolts, 14mm-18mm) ② Disconnect electrical (heated/power if equipped) ③ Remove the leather/cloth seat cover from the frame ④ Remove old compressed foam ⑤ Place new foam cushion on frame ⑥ Reinstall seat cover over new foam ⑦ Reinstall seat. You'll need: socket set, flathead screwdriver, trim tools. Pro tip: take photos before disassembly for reference. Video guide available on request. Important: compare new foam to old foam shape BEFORE installing to confirm exact match.
【Your 2006-2009 Ram is Worth Fixing — New Foam Costs a Fraction of a New Seat or New Truck】 Options for fixing a flat driver seat: ① New complete seat from dealer/junkyard ② Aftermarket foam from us: fraction of the cost ③ Do nothing: back pain, poor driving posture, faster fatigue on long hauls. If you're keeping your 3rd-gen Ram (and with 5.9L Cummins values going UP, most of you are), new seat foam is the highest-comfort-ROI upgrade you can make. 5 minutes into your first drive on new foam, you'll wonder why you waited so long.
【Important: Verify Fit BEFORE Installing — Compare Shape to Your Old Foam】 This foam fits Driver Side Bottom (front) for Ram 1500-5500 2006-2009 WITHOUT Occupant Classification System. Crucial step: Before discarding your old foam, place the new one next to it and compare shape, size, and mounting points. If anything doesn't match, contact us BEFORE proceeding. Not compatible with: Ram 2002-2005 (different shape), Ram 2010+ (may differ — verify), or models WITH Occupant Classification System sensor.