Please note that the order is being shipped from the EU and in some cases additional customs fees may apply
YIHUA 937BD+ ESD Digital Soldering Station 200-480°C 120W Lead-Free
YIHUA 937BD+ soldering station
200-480 °C continuously variable LED display ESD-safe suitable for lead-free Soldering iron YIHUA 907E
Compact soldering station for electronic work at work, in the workshop and in the hobby area. The temperature is continuously adjusted between 200 and 480 °C using the rotary control, and the red LED display continuously shows the actual actual value on the soldering tip.
A PID control keeps the set temperature constant and quickly adjusts it again after soldering. The “HEATING” indicator light flashes in time with the heating phases and shows at a glance whether the station is currently reheating or the temperature has been reached.
The most important things at a glance
|
🌡️
200 to 480°CInfinitely adjustable on the rotary control |
🔴
LED displayShows the actual temperature, easy to read even in bright light |
|
⚡
Up to 120 W heating outputShort-term for quick heating, only 22 W nominal power during operation |
📈
Quick readjustmentHigh-performance heating element quickly adjusts the temperature after each soldering point |
|
🛡️
ESD safeAntistatic, tip leakage resistance less than 2 ohms |
🎯
Calibration from the frontAdjustment via the opening labeled “CAL” without opening the housing |
|
🖊️
Soldering iron YIHUA 907ESlim handle with flexible supply cable and plug connection |
🔧
900M series tipsShaft Ø 6.5 mm, large selection of shapes as accessories |
equipment
- Two indicator lights: “PWR” signals operational readiness, “HEATING” lights up permanently when heating up and flashes as soon as the temperature is maintained.
- Scale on the front panel with temperature marks and heating curve as a guide.
- Power switch on the front, connector for the soldering iron with union nut.
- High performance heating element: ensures short heating times and quickly compensates for heat loss after each soldering point.
- Iron alloy soldering iron rest with metal tray and cleaning sponge – stable and low-wear.
- Suitable for lead-free: The temperature range up to 480 °C covers both lead-containing and lead-free solder.
- Error notice: The “SE” display indicates a defective heating element, a defective sensor or a disconnected soldering iron.
Technical data
| Model | YIHUA 937BD+ |
| type | Soldering station, temperature-controlled, thermostatic, ESD-safe |
| Rated voltage | 220-240V~, 50Hz |
| Performance | 22 W nominal power, max. 120W |
| Temperature range | 200-480°C / 392-896°F |
| Temperature setting | continuously via rotary control |
| Advertisement | LED numerical display (actual temperature in °C) |
| control | PID with real-time temperature tracking |
| Leakage resistance of the tip | <2 ohms |
| soldering iron | YIHUA 907E |
| Soldering tip holder | 900M series, shaft Ø 6.5 mm |
| Operating environment | 0-40°C / 32-104°F |
| Dimensions of basic device | approx. 155 x 112 x 90mm (±5mm) |
| Power plug | Schuko (EU) |
| Country of manufacture | China |
Scope of delivery
- 1 x YIHUA 937BD+ base station with power cable
- 1 x YIHUA 907E soldering iron with soldering tip
- 1 x Soldering Iron Rest with Cleaning Sponge
- 1 x user manual (English)
Suitable for
Soldering and desoldering work on wired components and surface-mounted designs such as SOP, DIP and SOIC. Typical areas of application include circuit board repairs, model making, audio and vehicle electronics, prototype construction and training.
Tips for longevity
- Before the first use, the tip at approx. Wet with solder (tinning) at 250 °C. Tube solder containing rosin is recommended.
- After each work, clean the tip and coat it with a fresh layer of solder - this prevents oxidation.
- Do not use metal files on the tip. Do not use pressure when soldering, as this does not improve heat transfer.
- Adjust to 250 °C or below during breaks. Continuous operation at high temperature while idling shortens the life of the heating element and tip. During longer breaks, switch off the station and pull out the power plug.
Attention: The soldering tip and handpiece become very hot. Only operate the device on a heat-resistant surface and do not leave it unattended. Ensure adequate ventilation. Not a toy - not suitable for children.
Seller and manufacturer information
|
🏢 Seller RADIOMAG GmbH Kölnerstr. |
🏭 Manufacturer Guangzhou Yihua Electronic Equipment Co., Ltd. Model: 937BD+ Item number: 128483 |
|
♻️ WEEE registration number DE 23511895 |
|
Old devices can be returned free of charge in accordance with the Electrical and Electronic Equipment Act (ElektroG). Electrical and electronic devices must not be disposed of with household waste. Illustrations may show accessories that are not included in the scope of delivery - the list under “Scope of delivery” is relevant. Subject to technical changes and errors; The manufacturer reserves the right to make changes to the specification and design without prior notice. All trademarks mentioned are the property of their respective owners.
