SICK M4000 Advanced multiple light beam safety device, sender and receiver pair.

FITMENT

Machine guarding and access protection on production lines, palletisers,

robot cells, conveyor entry/exit points and perimeter guarding.

4 beams at 300mm separation gives 900mm between outer beams.

Sender and receiver must be used as a pair. Check the part numbers below

against your existing installation to confirm compatibility before ordering.

SPECIFICATION

Sender:            M40S-043003AA0

Part no:           1 200 073

Serial no:         1624 0130

Firmware:          V1.10

Power consumption: <= 3.5 W

Scanning range:    0.5 ... 70 m

Manufactured:      June 2016

Receiver:          M40E-043003RB0

Part no:           1 200 100

Serial no:         1626 1235

Firmware:          V1.54

Power consumption: <= 8.5 W

Response time:     <= 10 ms

Scanning range:    Low 0.5 ... 20 m / High 9 ... 70 m, configurable

Manufactured:      July 2016

Common to both units:

Number of beams:      4

Beam separation:      300 mm

Beam diameter:        23 mm

Aperture angle:       <= 2.5 degrees at maximum scanning range

Supply voltage:       24 V DC +/- 20%

OSSDs:                24 V DC, 500 mA max

Enclosure rating:     IP65

Operating temp:       -30 C to +55 C

Connection:           Hirschmann style circular connector (11-pin sender,

                      8-pin + 5-pin receiver)

Operating instruction: 8010794 / WP70

Classification:       Type 4 IEC 61496, Cat 4 PL e EN ISO 13849,

                      SIL3 EN 62061 / IEC 61508

Receiver features:    Reset, EDM, ADO, EFI A/B

CROSS-REFERENCE

M40S-043003AA0

M40E-043003RB0

1 200 073

1 200 100

Please check the part number to confirm compatibility with your application.

Safety component. To be installed, configured and validated by a competent

person in accordance with the machine's risk assessment and the relevant

standards.

Storage: CL1

You will receive the exact item shown in the photographs.