This is a linear conversion module, processing by the internal chip,  PWM output data expressed by voltage signal.

Module parameters

1, the working voltage : 9V ~ 24V

2, the input voltage range : 4 ~ 24V

3, the input frequency range : 50Hz ~ 10KHz

4, the input duty cycle range : 0 to 100%

5 , the output voltage : 0.00V ~ 5.00V/0.00V ~ 10.00V

6, the input mode : J1 pad on the board : The default is open, not yet used to .

7 , output : J2 pads on the circuit board : open ( output 0.00V ~ 5.00V); shorted ( output 0.00V ~ 10.00V), the default is open.

8 , Applications: Remote data acquisition and control equipment ;

9 , Size: (L ) 26mm * ( W ) 23mm * ( height ) 10mm

Module interfaces:

24V: power supply positive interfaces (9V ~ 24V).

G: Power to the ground interface .

IN: signal input positive interface.

G: signal input negative interface.

OUT: Signal output interface(0.00V ~ 5.00V/0.00V ~ 10.00V).

G: Power to the ground interface .

Note : When the output 0.00V ~ 10.00V, power supply voltage to 15 volts .

Output (0.00V ~ 5.00V) Resolution : 0.050V / D ( V / per duty cycle )

Output (0.00V ~ 10.00V) Resolution : 0.100V / D ( V / per duty cycle )

Measured duty cycle calculation formula: ( the output voltage (V) / resolution ) = duty cycle ( % ) .

For example:

output (0.00V ~ 5.00V) 2.5V output

(2.5 (V) / 0.05) = 50 (%).

Package include:

1 x New PWM to Voltage PWM 0-100% to 0-5v 0-10v Linear Conversion Transmitter Module