
Don't let a low battery prevent you from using your electric vehicle. With the Qoltec mobile charger, you can charge your car's battery in just a few minutes. The portable charger is perfect for longer holiday trips, as its compact design means it takes up little space. You can easily transport it directly in the trunk or in the bag included in the set. The charger is powered from a standard 5-pin power socket, while the car is charged using a type 2 connector.

The charger has type 2 connectorwhich is currently official standard of the European Union and charges electric cars equipped with an appropriate charging socket. Type 2 connector is 7 contacts, of which 3 contacts or 5 are intended for charging and 2 for communication between the station and the car. Compatible with most electric cars sold in Europe. The Qoltec brand charger supports four current modes 16A, 20A, 24A and 32A. It is worth adding that the type 2 connector is intended for electric vehicles with a charging power greater than 3kW.

The product is equipped with multifunctional, 2.4'' LCD display and LEDs indicating charging status. On the display we can:
- set the current value using the A button: 16A, 20A, 24A, 32A;
- to check exact charging time,
- set loading time delay just use the button with the clock icon,
- monitor the charger's operating temperature in real time thanks to the built-in plug temperature sensor, the charger will immediately stop working if a safe value is exceeded and will automatically resume working when the temperature returns to normal level,
- monitor the progress of the charging process,
Automatic error repair
Additionally, the charger has an intelligent chip that automatically corrects errors while loading, reacting appropriately if any of the parameters exceed the norm, ensuring stable operation of the charger.

You can set a delayed charging start time of 1, 2, 5 or even 8 hours and save on energy costs, for example by using the night tariff; this is a more economical solution because it does not burden the system. Simply connect the charger to the power supply and then press the delay button a certain number of times before connecting the car. By pressing the button with the clock icon, each click delays the charging by 1 hour..

If you want to mount the EV charger on the wall, you should choose a suitable place, preferably close to the car and a power source. It will also be necessary installation of a differential circuit breaker - the best choice will be a type B RCD as a means of full supplementary protection. Make sure it is a place protected from moisture, free from any mechanical damage and not exposed to direct sunlight. Be sure to check if this is the case. A high level of comfort will be provided 5 meter charging cable with ergonomic plug.

Our chargers are made of durable, UV-resistant, non-flammable polycarbonate. Additionally, the charger is highly water-resistant and dust-proof. The housing has special holes intended for external mounting.

Use your own renewable, clean energy obtained from photovoltaics to charge your vehicle - this is the way to reducing operating costs your car and reducing carbon dioxide emissions. You can top up your car at any time and even several times faster. The number of panels needed to charge a car will depend on the battery parameters, vehicle model and distances covered. You can charge it in two ways:
- while when photovoltaic panels produce energy - this is the most cost-effective solution
- using excess energy produced by photovoltaic panels, which was transferred to an energy storage facility or to the grid and can be used at a later time.

When designing the chargers, we focused primarily on security. Now you can charge your car safely and quickly. The product has advanced security features and LED diodes that change color depending on the current status..
Do you care about the high quality of the product you buy? Our solutions will meet your expectations. The chargers we offer are covered by 24-month warranty valid from the date of purchase.
Parameters:
| Security: | Overvoltage protection Undervoltage protection Thermal overload protection Short circuit protection Current leakage protection Grounding Temperature monitoring |
| Package height [mm]: | 140 |
| Cable length: | 5m |
| Net weight [kg]: | 3,400 |
| Comments: | The charger can only be used if the mains supply is equipped with a differential circuit breaker. Do not attempt to repair the device yourself. Please do not use the device with an additional extension cord. |
| Gross weight [kg]: | 3,800 |
| Operating temperature: | -30˚C ~ +50˚C |
| Certificate: | CE |
| Producer: | Qoltec |
| Degree of protection: | IP65 |
| Guarantee: | 24 months |
| Type: | 2 |
| Color: | Black, green |
| Operating current: | max 32A |
| Input voltage: | 230VAC |
| Dimensions (D/L x W x H): | 215 x 98 x 58 mm | 235 x 70 x 62 mm (charger) | 120 x 385 x 345 (bag) |
| Insulation resistance: | >10MΩ |
| Output voltage: | 230VAC |
| Package contents: | 1 x EV Charger 1 x Wall Mount Bracket 1 x Mounting Screws 1 x Charger Storage Bag 1 x User Manual 1 x Warranty Card |
| Display: | LED 2.4'' |
| Frequency: | 50Hz |
| Packaging: | Box |
| Charging interface type: | IEC 62196-2 |
| Depth / Length of the package [mm]: | 355 |
| Plug type: | 5-PIN CEE |
| Package width [mm]: | 400 |