Cartek FIA 8874-2019 Circular LED Rain Light for Motorsport Race Rally Cars

Enhance your track safety and meet the latest motorsport regulations with the genuine Cartek FIA 8874-2019 Circular LED Rain Light. Engineered to withstand the harshest racing environments, this high-intensity circular rain light features 16 ultra-bright LEDs, delivering a minimum brightness of 800CD—over three times brighter than previous generation models. Designed for universal motorsport applications, it is fully homologated to the latest FIA 8874-2019 standards, making it a mandatory safety upgrade for competitive race, rally, and track day cars.

Key Features & Benefits

• FIA 8874-2019 Homologated: Fully approved under homologation number RL.010.22, meeting the latest strict safety requirements for global motorsport competition.
• Dual-Mode Functionality: Can be operated in either Static mode or Flashing 4Hz mode. It can also be wired as a combined multi-purpose Rain and Brake Light.
• Maximum Visibility: Features 16 high-intensity red LEDs (620nm) producing a minimum of 800CD, ensuring maximum visibility in heavy spray, fog, and rain.
• Ultra-Durable Construction: One-piece solid resin moulding rated to IP65, providing complete protection against water, dust, and vibration.
• Lightweight & Low Profile: Weighs just 120g with a slim 14mm profile, minimizing aerodynamic drag and weight.
• Premium Wiring: Supplied with a 190mm Mil-Spec flying lead (Type 55 22awg wire) for reliable electrical connections.

Technical Specifications

Specification	Detail
Brand	Cartek Motorsport
Part Number / MPN	CK-LRS-16CM
Homologation Number	RL.010.22 (FIA 8874-2019 Approved)
Dimensions	Ø79.5mm Diameter x 14.0mm Thickness
Weight	120g
Light Source	16 High-Intensity Red LEDs (620nm)
Brightness	800CD (Minimum)
Operating Voltage	11.3V – 15.6V DC
Power Consumption	700mA @ 12.5V
Operating Temperature	-10°C to +105°C
Storage Temperature	-40°C to +125°C
IP Rating	IP65 (Water & Dust Proof)
Mounting	2 x M6 Studs (Max Torque 7.0 N/m)
Electrical Connection	190mm Mil-Spec Flying Lead (Type 55 22awg wire)

Wiring & Installation Guide

The Cartek Circular Rain Light is highly versatile and can be configured in multiple ways depending on your vehicle’s wiring setup:

• Static Mode Only: Connect the Red wire to the +12V supply (via switch), leave the Blue wire disconnected, and connect the Black wire to Ground.
• Flashing 4Hz Mode Only: Connect the Blue wire to the +12V supply (via switch), leave the Red wire disconnected, and connect the Black wire to Ground.
• Combined Rain & Brake Light Mode: Connect the Red wire to the +12V Brake Switch feed, the Blue wire to the +12V Rain Light Switch feed, and the Black wire to Ground.

Note: The rain light will become hot to the touch if operated in Static Mode for extended periods. If mounting in close proximity to the exhaust system, it is highly recommended to use Flashing 4Hz mode only.