Note: The Handpiece Lubricator must be connected to the air compressor
Handpieces show in the photos are not included, only for display.
Features
I.The device is accurately controlled by the microcomputer to ensure that the oil output is required for handpiece maintenance to avoid additional loss of the oil.
2.It can lubricate and maintain two high-speed handpieces and one low-speed handpiece at the same time.
3.It can lubricate and maintain the spindle of the handpiece.
4."Air button" on the operation panel, which can remove the excess oil residue in the
handpiece.
5.The oil filling time and blowing time can be set and saved according to the needs for the next use.
6.The door cover has a built-in baffle, which can significantly reduce oil mist contamination on the door cover.
7. With the negative pressure suction system can effectively prevent the oil mist from spreading, and the device has a built-in oil absorbent pad, which can adsorb the dirty oil to the oil absorbent pad after suction to ensure a clean and tidy working environment.
8.When the door cover is opened when the device is working, it will stop working immediately.
Description:
1. Purpose
Conventional oilers are used to lubricate high-speed and low-speed dental handpieces, primarily lubricating the tubing and internal mechanisms. The Holy HM-1 oiler, however, features an additional function for lubricating the main shaft, which primarily lubricates the handpiece clamping area (chuck or three-lobed spring)—that is, the main shaft
2. At which stage of the dental procedure is this product used?
The standard practice for dental handpieces is “one patient, one handpiece.” After treatment is completed, the handpiece must be cleaned, dried, lubricated, and sterilized.
This product is used solely for the lubrication step. The Holy HM-1 lubricator is equipped with a separate air-blow button; if too much lubricant is dispensed, you can use this button to blow out the excess, preventing oil buildup.
3. How many handpieces can be lubricated with a single fill of lubricant?
This microcomputer-controlled product features an oil-saving mode. The built-in oil reservoir has a capacity of 200 ml, and the dispensing volume is precisely controlled by the machine’s internal circuitry. Each 200 ml of lubricant can lubricate at least 2,000 handpieces. (Note: If the customer adjusts the peristaltic pump’s operating time, it will increase or decrease the oil output for each phone. The machine is factory-calibrated, and adjusting this time is generally not recommended.)
4. The oil dispensing volume is consistent for each handpiece. The lubrication process involves lubricating each handpiece individually, followed by simultaneous air blowing.
5. The oil dispensing volume for main shaft maintenance is half that of handpiece maintenance, but it provides better maintenance results (lubrication time and volume are adjustable).
The main technical specifications
Power input :AC100-240V 50/60Hz
Electrical grade: class 1
Model: HM-1
Fuse: 250V 2A
Power: 60W
Dimensions:250x300x390mm
Oil pump voltage: DC24V
Working pressure: 0.2-0.4MPa
Net weight:8.5kg
Oil cylinder capacity: 200ml
The degree of protection: IP20
Hole:4H
Package Listing:
Main unit x l
Straight connector x l
Power cord x l
Air tube (1M) x l
Oil-filled funnel x l
O-ring x 2
Oil absorbent pad x 10
Baffle x 10
Straight connector (Φ6+Φ6) x l
Straight connector (Φ6+Φ8) x l
User Manual x l
Important Notice
1. This device must be connected to an air compressor when it is working.
2.Please use a three-pin socket with protective grounding, and make sure the supply socket
connection of the ground terminal is secure.
3.Please place the device on a flat and stable indoor platform for use.
4.Do not place it near flammable substances.
5.Please use it in a cool, dry and ventilated place for use.
6.This device may produce slight electromagnetic interference with other products that are
more sensitive to electromagnetic interference during use, please stay away from this device
when use other products that are sensitive to electromagnetic interference at the same time.
7. When the device is not used for a long time, it is recommended to disconnect the power
plug from the power supply, and unplug the air tube from the device.
8.It is recommended to use original parts and materials when replacing device parts and
consumable materials, in order to guarantee the performance of the device.
9.If a peculiar smell or abnormal noise when using is found, please cut off the power
immediately and contact the local dealer or manufacturer.
Routine maintenance
1.Clean and replacement of the baffle
The baffle can be cleaned with tap water, or wiped with low-concentration alcohol, can
not be cleaned at high temperature, can be used repeatedly, if damaged, please replace,
otherwise it will lead to the leakage of maintenance oil. It is recommended to replace the
baffle regularly according to their own frequency of use.
2.Replacement of the oil absorbent pad
Pull out the oil tray at the bottom of the device, take out the oil absorbent pad that needs to
be replaced, and replace it with a new one, it is recommended to replace the oil absorbent
pad regularly according to their own frequency of use.
3.Drain the air filter
(Replacement of the oil absorbent pad)
Pull up the knob at the bottom of the air filter to drain.
4.Replacement of air filter
Remove the air inlet pipe and outlet pipe of air filter respectively, and remove the two
fixing screws connecting the air filter with a Phillips screwdriver, then install the new one.
