Mitsubishi Pajero 2 V20 PU Bushing Set Poly Bushings Control Arm

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


Mitsubishi Pajero 2 V20 PU bushing set bearing poly bushings control arm

On the Mitsubishi Pajero II V20, the bushings of the front wishbone, rear trailing arm and the Panhard rod work together to guide the wheels and axles. After many years, soft or worn rubber bearings can cause additional movements and noise. The orange PU set with 75 Shore A replaces the listed bearing points. 60 or 65 mm wide variants are available for the axle-side bushings of the rear trailing arms. The most important information Suitable for: Mitsubishi Pajero II V20, model series NH, NJ, NK and NL Construction period: 05/1991 - 04/2000 Selectable width at the rear: 60 or 65 mm Material: Polyurethane Hardness: 75 Shore A Color: Orange Rear stabilizer bushings: for 20 mm stabilizer, measure 60 or 65 mm before orderingThe variant selection concerns the axle-side bearings of the rear trailing arms. Measure the recording width directly on the vehicle; A selection based solely on year of manufacture or engine is not reliable. Scope of delivery Front lower wishbones: 2 PU bushings and 2 metal sleeves each in the positions listed Rear trailing arms, axle side: 4 PU bushings and 4 metal sleeves in the selected width Rear trailing arms, frame side: 4 PU bushings Rear Panhard rod: 2 PU bushings and 2 metal sleeves Intermediate steering lever: 2 PU bushings Coupling rods: 12 PU bushings Front stabilizer: 2 PU bushings Rear stabilizer: 2 PU bushings for 20 mm Assembly instructions Compare the selected width with the removed original bushing. Check the control arm, trailing arm, Panhard rod, stabilizer bar and mounting points for corrosion, deformation and wear. Check screw connections professionally after assembly.

Mitsubishi Pajero 2 V20 PU bushing set bearing poly bushings control arm

On the Mitsubishi Pajero II V20, the bushings of the front wishbone, rear trailing arm and the Panhard rod work together to guide the wheels and axles. After many years, soft or worn rubber mounts can cause additional movement and noise.

The orange PU set with 75 Shore A replaces the bearing points listed. 60 or 65 mm wide versions are available for the axle-side bushings of the rear trailing arms.

The most important information

  • Suitable for: Mitsubishi Pajero II V20, model series NH, NJ, NK and NL
  • Construction time: 05/1991-04/2000
  • Selectable width at the back: 60 or 65mm
  • Material: Polyurethane
  • Hardness: 75 Shore A
  • Color: Orange
  • Rear stabilizer bushings: for 20 mm stabilizer

Measure 60 or 65mm before ordering

The variant selection concerns the axle-side bearings of the rear trailing arms. Measure the recording width directly on the vehicle; A selection based solely on year of manufacture or engine type is not reliable.

Scope of delivery

  • Front lower wishbones: 2 PU bushings and 2 metal sleeves each at the positions listed
  • Rear trailing arm, axle side: 4 PU bushings and 4 metal sleeves in the selected width
  • Rear trailing arms, frame side: 4 PU bushings
  • Rear Panhard rod: 2 PU bushings and 2 metal sleeves
  • Steering intermediate lever: 2 PU bushings
  • Coupling rods: 12 PU bushings
  • Front stabilizer bar: 2 PU bushings
  • Rear stabilizer bar: 2 PU bushings for 20mm

Assembly instructions

Compare the selected width with the removed original bushing. Check the control arm, trailing arm, Panhard rod, stabilizer bar and mounting points for corrosion, deformation and wear. Check screw connections professionally after assembly.

×

Shipping information

Free shipping within Germany. Worldwide shipping possible.

Click "More Details" on shipping costs for additional information.

Do you have any questions?

Contact us

On the Mitsubishi Pajero II V20, the bushings of the front wishbone, rear trailing arm and the Panhard rod work together to guide the wheels and axles. After many years, soft or worn rubber bearings can cause additional movements and noise. The orange PU set with 75 Shore A replaces the listed bearing points. 60 or 65 mm wide variants are available for the axle-side bushings of the rear trailing arms. The most important information Suitable for: Mitsubishi Pajero II V20, model series NH, NJ, NK and NL Construction period: 05/1991 - 04/2000 Selectable width at the rear: 60 or 65 mm Material: Polyurethane Hardness: 75 Shore A Color: Orange Rear stabilizer bushings: for 20 mm stabilizer, measure 60 or 65 mm before orderingThe variant selection concerns the axle-side bearings of the rear trai