MTX Thunder Elite 1501D, a high-performance, mono-block Class D car audio amplifier designed specifically for powering subwoofers.

Key Specifications & Features

Power Output: Rated at 1,500 Watts RMS into a 2-ohm load. Some bench tests have shown it can exceed these ratings, reaching over 1,600 to 1,700 watts at 1-ohm.

Cooling System:

Features Xtant Technologies cooling, which uses a self-adjusting fan to manage heat based on the amplifier's output.

Prizm EFX: An integrated lighting system that allows you to customize the LED colors of the amplifier.

Tuning Controls: Gain Control: Includes a "x10"

switch to accommodate varying input signal voltages.

Low-Pass Crossover: A variable filter (40Hz to 200Hz) with a steep -24dB/octave slope.

Parametric EQ: Provides up to 12dB of boost or cut for specific frequencies between 38Hz and 80Hz.

Subsonic Filter: A switchable filter fixed at approximately 30Hz to protect subwoofers from ultra-low frequencies.

Wiring Recommendations Due to its high power draw, MTX recommends using 1/0-gauge power and ground leads. It typically requires a fuse rated at 150 to 200 amps installed near the battery for safety