Polyester protective cover | Polypropylene fiber material | Long wear resistance life | Multi layer weaving | Dense knitting
| Tonnage | Width | Thickness | Length |
| 1T | 35mm | 7mm | 1/2/3/4/5/6/8/10M |
| 2T | 50mm | 7mm | 1/2/3/4/5/6/8/10M |
The following similar products are not allowed to be lifted:
1. Steel plate or angular steel
2. Alien molds
3. It is absolutely not allowed to pass through the middle (inside the pipe) for lifting!
Maintenance method of lifting belt:
1. The lifting belt should be placed away from heat sources (flames and electrical welding) or sunlight and long-term ultraviolet radiation
2. The lifting belt should be cleaned once every 3-6 months. For acid-base applications, it should be used immediately after use
Clean the lifting belt with cold water or cleaning agent, air dry and store
3. After use, the lifting belt should be stored on a shelf and not directly on the ground to prevent mold, rodent bites, etc
4. For damp lifting straps, they should be dried and stored to avoid moisture and mold
Scrap criteria for lifting straps:
1.When the lifting belt is cut, severely scratched, loose, or partially broken, it should be scrapped
2.When the surface of the lifting belt is severely worn, abnormally deformed, and the wear reaches 1/10 of the original sling width, it should be scrapped
3.When synthetic fibers soften or age (yellowing), have rough surfaces, peel off, change elasticity, or weaken strength, they should be scrapped
4.When the lifting belt is severely twisted, deformed, or fuzzy, it should be scrapped
5.When the lifting belt is moldy, deteriorated, burned by acid and alkali, melted or burnt by heat, has multiple loose or corroded surfaces, it should be scrapped
6.When there are local scratches or sharp objects on the lifting equipment, it should be scrapped
7.When lifting with transverse edge cutting, it should be scrapped

