This
is a very easy install that can be done in about 15 minutes but it is
recommended that this adapter and conversion be completed by a licensed
plumber or certified propane technician.
1. Remove old hose and Weber regulator from the grill.
2.
Wrap threads on the male end of this adapter with gas rated teflon tape. Do not use teflon tape on the female end.
3. Install this adapter where the old regulator was removed from.
4.
Install new hose with low pressure tank side regulator (sold
separately) to the adapter. Can be found at any hardware store in the
bbq area.
5. Connect regulator to any standard full
size propane tank, ie, 10lb, 20lb, 30lb, 40lb. Note, 1lb throw away
bottles will not fit on your new regulator unless you purchase a 1lb. adapter.
6. Slowly open propane tank valve.
7.
Test for leaks with a spray bottle filled with water an a tiny bit of
dish soap by spraying all connections when under pressure. If you see
bubbles forming at any connection, redo the connection before lighting
the grill.