• Technology
• Industrial
• Lab & Test
• Electrical
• Semiconductor

Manufacturer: EnvisionTEC

Condition: Used. Comes in non-original packaging. This system is in Fair cosmetic condition, with lots of residues from prior use on the top and front covers of the printer, as well as the outside of the light box that don't want to clean off with alcohol or water. The Basement is a bit cloudy, so you may want to order a new PSA or M-type tray. The tray in the curing box is in bad condition but should still hold a print.  The computer has lots of white dots on top.

Please NOTE: the software says the light engine in the printer has 5015 hours in use, and the life expectancy is 5000 hours - you may need to replace the LED.  The curing box has 66 hours showing.

Notes: This printer is offered in Good working condition, possibly needing some consumables replaced. We got this from the prior owner who said that it worked, but the computer died.  We installed the included software on a replacement computer for you. The MicroPrinter 250 disct has 3D printing goo on the disc and wouldn't read, but we were able to copy that folder from the old computer's memory and leave it on the desktop of a replacement computer so you still have access to the MicroPrinter software.  We verified in the MicroPrinter software that this computer can command this machine to home itself, level the bed, and turn the light engine on and off.  We found that a key written in the manual gives a 6-month license to the software shown in photo#6. We are not sure how licensing for this system will work for you.  The light box pulses a bright light inside according to the number of pulses set on the controller.  We don't have any resin and no prints were attempted. No other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

Specifications:

Questions? Click on the "Contact" button below.
Monday to Friday 8:00 am - 5:00 pm CST. Se habla espanol!