Upgrade your ADA MP-1 to the latest firmware version, v2.01.   This upgrade will unlock additional functions and features so you can get the most out of your ADA MP-1

Warning - Chip must be installed in the correct orientation.  Installing backwards will damage the chip and your device!

Install Instructions

1. Shut down your MP-1 and disconnect power
2. Remove the top cover to expose the circuit board. 
3. Find chips IC30 as shown in the picture.  This is the chip you need to swap.  Be sure to note the orientation of the notch on the chip.    
     Recommended - Take a picture now, just in case you forget which way the notch faces!
4. Pull the chip straight out with the chip puller tool ensuring not to bend any pins.
5. Install the new chip in the same slot ensuring you have the notch pointing in the same direction.  
    Note - You may need to carefully bend the chip legs slightly to align them with the socket holes.
6. Reinstall the cover, power up and enjoy!