No more calls, no more cost, find and fix it by yourself.
Note:
Two 9V batteries required.
Batteries are not included.
Non-contact probe audibly identifies selected wire or cable.
Rotate the volume/sensitivity control on the probe for the appropriate level and sensitivity to identify and trace the wire.
In Tone mode connect the red clip to the Wire you wish to trace and the black clip to ground if possible.
In Continuity mode connect each clip to each end of the circuit cable.
If the wire is short circuited or broken the Red LED with light.
You can then use Tone mode to trace the wire all the way to the break location.
Use the RJ-11 plug to identify ring and tip telephone line and test the line condition (clear, busy, ringing).
1x Alligator Clips
1x Wire Tracer Probe
1x Transmitter with RJ11 phone connector
Multifunction Wire Locator:
Trace Wires in a Range of Wires and Cables
Note: Not for build commercial buildings, not work on live AC wires
Find Wires Quickly and Accurately:
Quickly Detect the Continuity of Cables or Wires
The Probe Not Need Touching the Wire to Pick Up a Tone.
Non-contact Probe Audibly Identifies Selected Wire or Cable