Specification：

Spacer Thickness:  1.5 inch or 38.1 mm

 

Vehicle bolt pattern:  5x4.5 inch or 5x114.3 mm

 

Wheel bolt pattern：5x4.5 inch or 5x114.3 mm

 

Thread Size：12x1.5


Hub Bore: 60.1 mm

 
 
Fitment:
 

For Lexus

For 2021-2022 Lexus ES250

For 1992-2002 Lexus ES300

For 2013-2021 Lexus ES300h

For 2004-2006 Lexus ES330

For 2007-2021 Lexus ES350

For 2016-2020 Lexus GS F

For 1998-2018 Lexus GS300

For 2007-2020 Lexus GS350

For 1998-2000 Lexus GS400

For 2010-2018 Lexus GS450h

For 2008-2011 Lexus GS460

For 2012-2014 Lexus IS F

For 2016 Lexus IS200t

For 2006-2015 Lexus IS250

For 2001-2019 Lexus IS300

For 2006-2019 Lexus IS350

For 1990-2000 Lexus LS400

For 2015-2016 Lexus NX200t

For 2018-2021 Lexus NX300

For 2015-2021 Lexus NX300h

For 2018-2021 Lexus RC F

For 2016-2017 Lexus RC200t

For 2016-2021 Lexus RC300

For 2015-2021 Lexus RC350

For 1999-2002 Lexus RX300

For 2005-2006 Lexus RX330

For 2010-2022 Lexus RX350

For 2018-2022 Lexus RX350L

For 2006-2008 Lexus RX400h

For 2011-2022 Lexus RX450h

For 1992-2000 Lexus SC300

For 1992-2000 Lexus SC400

For 2000-2009 Lexus SC430

For 2019-2022 Lexus UX200

For 2019-2022 Lexus UX250h   

For Toyota

For 1995-2002 Toyota Avalon

For 1995-2002 Toyota Camry

For 2017-2018 Toyota Corolla iM

For 2006-2020 Toyota Highlander

For 2009-2013 Toyota Matrix

For 2016-2020 Toyota Mirai

For 1991-1995 Toyota MR2

For 1998-2020 Toyota Sienna

For 1999-2008 Toyota Solara

For 1986-1998 Toyota Supra

For 2009-2016 Toyota Venza   

For Scion

For 2011-2016 Scion tC

For 2008-2015 Scion xB

 
 
Package include:

4 Pcs Wheel Spacers 

1 pair  Gloves

1 x Steel Wire Ball 

 

 

[Important Notes]

 

1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.

2. Measure the fender gap and stock bolt length to choose suitable thickness.

3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.

4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.

5. Returns are only accepted if unused and not  installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)

-- Vehicle fitment compatibility is only a guide, please ensure that these are the correct ones for your vehicle.


-- For 1 inch or less or special adapters,

If your vehicle requires 2" spacers but you purchased ≤1" , the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.


-- For 2 inches or more or special adapters,

If your vehicle requires 1" spacers but you purchased ≥2", the stock studs are shorter to hold the spacer safely, you need to exchange to small size adapters or purchase longer studs yourself.

 

What should I pay attention to during installation?

 

1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel.

2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short.

3) DO NOT proceed if both of the wheel spacer do not fit.

4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers.

5) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs).

6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident.
7)All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles.

8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring.  

1.We only accept PayPal. PayPal is the only online payment method we accept. Please make sure you have a valid/confirmed PayPal account prior bidding.

2.All Paypal Payments must be Confirmed. Payment must be made within 48hrs of the auction end time. Non-Paying bidders will be reported.

3.When you get your package,maybe you will pay some charges, it's taxes for local customs,not pay to us, and the fees are depends on the customs, all buyer are same.

1.Items will be shipped within 2 business days after payment is received.

2.We ship to your eBay address. Please make sure your eBay address is correct. Buyer takes responsibility if eBay address is wrong.

3.Import duties, taxes and charges are not included in the item price or shipping charges. Please check with your country customs office for these additional charges.

4.We shipping using UPS or USPS from our nearest warehouse to you. Tracking numbers will be emailed upon shipment.

1.Please feel free to email us if you have any question.

2.We appreciate you contact us via eBay message when you are not satisfied rather than open case or leave negative feedback directly. We'll try our best to solve the issue.

3.Refund will be issued once we receive your returned items. Buyer is responsible for all return shipping charges.

4.Please contact us for return process before you return the item.

5.All items for exchange or refund must be returned in "as new" condition.

We are the responsible seller ,always provide high-quality products and best service .If you have any questions, please contact us, and will try our best to help you. Please contact us by eBay Message, and we will reply you within 24 hours. Thank you very much!
We are the professional auto parts manufacturer , and provide line lock, AN hose end fittings , fuel line , fuel filter , fuel regulator , exhaust cutout , exhaust tips , exhaust muffler and so on .The quality of the product to be secured. If you have any questions or any needs , please contact us , and will try our best to help you.
PushAuction