1:50 scale Miami Trip 3 ride (Modern seats) Showman's fairground  MDF model kit. Laser cut MDF and 3d printed Miami Trip 3 ride kit.
NOTE! this model does not come with printed instructions or Decals(Stickers),you can view and download the pdf instructions and some free Decals www.lobokit.co.uk and print them as many times as you need, There are also some build aid photos for you to look at, Please feel free to look at the instructions before purchase and see if it is within you capabilities.
The MDF laser cut kit is primarily designed as a static model but could be motorized etc.There are 3d printed parts such as the counterbalance weights, fences and bearings etc. included. The plastic parts are printed in PLA plastic and may be a different color than shown dependent on what is on the printer at the time.The seats and restraints are printed in a High quality resin so have very good detail.you may be able to motorize this if you know what you are doing, however I cannot help with this. Motorized or not, it is a nice addition to any 1:50 scale layout. The model isn't too difficult to assemble and you can download full assembly instructions free.There are holes for 3mm LEDs to be fitted if you wish or just glue thin card over the holes and glue on gems.The kit is assembled with wood glue or similar.Dimensions of the model are, 253mm wide plus the paybox by 138 mm high plus the letters  x 87 mm front to back. The fences are 20mm high , each letter is around 18mm high