Hawk E6 ~ Electric Control Line Combat Model 

Laser-cut SINGLE Rib & Parts Set

Important: This is NOT a complete kit.
❌ No plan included (digital plan available by email on request)
❌ Additional materials and hardware required 

The Hawk E6 is an electric control line combat model designed by Tim Hobbins for a new Electric Combat class. It is roughly XL vintage combat size and optimised for electric power.

Proposed rules for the new Electric Combat class are available on request and further details can be found on the Hobbins Hobbies Facebook page.

Model Specification:

• Design:                        Tim Hobbins (Hobbins Hobbies)
• Wing span:                  35 inches
• Aerofoil:                      15% (36mm thick) 
• Flying weight:              Approx.14.5oz
• Motor:                         2212 size motor with a KV of 1400
• Battery:                       3 cell 11.1 volt 1300mah Zee batteries
• ESC:                           30 amp (Budget units suitable)
• Propeller:                    8/4 only
• Line Length:                44ft
• Lap times:                   Just over 4 seconds

What's Included

What's Included

29 laser-cut parts for ONE combat model:

• 8 x wing ribs (3.0mm balsa)
• 11 x LE riblets (2.4mm balsa)
• 1 x tail extension + 1 elevator (3.0mm balsa)
• 2 x centre ribs + 2 x nose ribs (5.0mm balsa)
• 2  x fuselage doublers (3.0mm lite ply)
• 1 motor mount (6.0mm Lite ply)
• 1 x bell crank support plate (3mm birch ply)