eBay

Precision LCR Bridge with Accuracy 0.05% ±5 Digits Frequency Range 10Hz～200kHz

Introduction:

The newly upgraded item adopt true color TFT-LCD display. Displayed in large fonts, readings are more intuitive.
The item with continuous frequency point of 10Hz~200kHz with a resolution of 0.001Hz. Test signal level 0.01Vrms ~ 2.00Vrms (10mV step), add DCR measurement and internal DC bias (DC BIAS, ±2.5V) .
The item can test the 4 parameters of the component at the same time. Each parameter can be arbitrarily configured. The newly improved instrument realizes full 6-bit display of the main and auxiliary four parameters.
Can scan 10 kinds of frequencies or level lists, and can also be used for 3 groups.
User frequency is corrected to improve accuracy.
Built-in comparator, through the HANDLER interface combined with PLC to complete the automatic sorting of components.
Built-in RS232/RS485/USB interfaces and GPIB inteface optional, SCPI and Modbus support.

Features:

True color TFT-LCD display.
Store 999 LCD screen files, trigger delay, automatic level control (ALC)
Correction function: full-scale open circuit and short-circuit sweep frequency clear, three groups of users point frequency calibration.
Multi-frequency test: support 10 frequency scan tests
Multi-level test: support 10 level scan tests
10 sets of file management for full storage of instrument status, list scan settings and comparator settings.
Enhanced comparator (sorting) function: Programmable P1~P9 Nine-segment sorting, main parameters HI, IN, LO display and output, NG, AUX, SREJ, IDX, EOM, etc. Output.
Absolute deviation (ABS) comparison mode, relative deviation (PER) and order (SEQ) comparison.
Switchable accessory file (AUX) sorting.
Programmable from 1 to 200 times to provide stability.
Custom sorting results are heard.
Built-in RS232/RS485/USB interfaces and Handler interface, GPIB interface optional.
Protocol: SCPI and Modbus.
1000V super shock protection
Application:
Componets and materials measurement such as Inductor, Magnetic core, Ferrite core, Capacitor, Transformer and etc.
Laboratory quality control
Feed inspection
Component sorting

Specifications:

Test Functions	Cs-Rs,Cs-D,Cp-Rp,Cp-D,Lp-Rp,Lp-Q,Ls-Rs,Ls-Q,R-X,Z-θrad,Z-θdeg DCR
Accuracy	SLOW/MED: 0.05%; FAST: 0.1%
Measurement Frequency	10Hz～200kHz (Resolution 0.001Hz）
Measurement Range	AUTO/HOLD/NOMINAL 9 Ranges
Measurement Speed	40 times/s, 10 times/s, 3 times/s
Display Range	L: 0.00001μH-9999.99H C: 0.00001pF – 9999.99μF R,X,Z: 0.00001Ω - 99.9999MΩ D, 0.00001 – 9.99999 Q: 0.00001 – 99999.9 Δ%: -999999% - 999999% θ(deg): -179.999° -179.999° θ(rad):-3.14159 – 3.14159 DCR: 0.00001Ω ~ 99.9999MΩ
Source Resistance	30Ω, 50Ω and 100Ω
Monitor Parameter	Z, D, Q, θr, θd, R, X, G, B, Y, Vac, Iac, Δ, Δ%
Display Reader	6 digits: 999999
Equivalent Circuit	Serial and Parallel
Signal Level	10.00mV~2.00V AC (ALC) 100.0μA~20.00mA AC (ALC)
DC BIAS	-2.5V~+2.5V (0.5%+0.005V)
Average	1~256
Trigger Mode	INT/HOLD/MAN/BUS
Trigger Delay	0.01ms~60s
Comparator	OK: 10-BINS NG:1-BIN AUX: 1-BIN
List Test	10 Steps (Frequency/Voltage/Current)
Comparator Mode	SEQ/ABS/PER
Adjustment	OPEN/SHORT Zeroing (ALL,SPOT)
Files	built-in 10 files and USB Disk 10 files
Data Logger	9999 Log Files (.csv)
Beep Feature	OFF/PASS/FAIL
Interface	RS232/RS485/USB/HANDLER/GPIB(OPTION)
Protocol	SCPI/Modbus
Other Functions	AUTO LCZ
Power Supply	AC 100V-240V, 50Hz-60Hz 20W MAX
Dimension & Weight	264(W)x107(H)x350(L) 3kg, net