Dental  bonding Bracket Light cure adhesive

 

 

Description：

Warning:  Primer and adhesive contains acrylate monomers. Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals. May cause eye and skin irritation.

 

Precautions: Avoid eye and skin contact. Wear gloves when handling this material.

 

Precaution:Please follow manufacturer's directions on the handling, proper use and recommendations for eye protection, when using a curing light

 

This system is designed to be used at room temperature (20-25°C, 68-77°F)。Storage between 2-27°C/35-80°F Light Sensitive

 

Packing List:

1 x Adhesive paste Syringes(3.5g)

1 x Primer Bottle (3ml)

1 x Instruction Booklet

20 x Brushes

Other accessories

 

 

------------------------------------

Etching Gel 37% 5ml

Denterx etching gel is a polymer thickened gel for use on enamel and dentin.

This gel will effectively treat enamel and dentin, producing the necessary microretentive surface for successful bonding. The polymer thickener creates thixotropic properties, enhancing handling characteristics. The etchant rinse away cleanly and quickly, leaving no residue.

Packages: Refill: 5 ml/syringe, Instruction X1

Indications:

Treat dentin and enamel, Treating agent on dental restorative material.

1. Isolate tooth and then prepare the cavity in a conservative manner. clean the entire surface with a slurry of pumice and water.

2. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. allow etchant to remain in palce for 15 seconds. etching time should be monitored with a stopwatch. begin timing at the end of application.

Option: place etchant enamel first, then proceed to cover dentin, for a slightly longer enamel etching time.

3. Rinse thoroughly (at least 5 seconds) to completely remover all traces of etchant.

 

----------------------------------------------------------

Bonding Adhesive 5ml

Describe：

This product is a one-component liquid, and its main ingredients include UDMA and other multifunctional methacrylic resins. It does not contain solvents and inorganic fillers, and is safe and harmless to the human body. The product is a light-curing adhesive material, which is clinically used for the bonding of dentin and enamel. Suitable for bonding resin materials and ceramic materials.

Scope of application：

Used for bonding dentine and enamel with resin and ceramic materials.

Clinical operation steps:

1.  Pretreatment of caries and pulp protection.

2.  Use 37% acid etchant for treatment, then clean it thoroughly with water, and dry it thoroughly with an oil-free air gun.

3.  Apply a layer of adhesive evenly on the tooth surface with a small brush.

4.  Make the adhesive layer even as far as possible with the wind power of the air gun.

5.  Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive.

6.  Please use the composite resin filling material according to the original manufacturer's instructions, as well as the subsequent grinding and reconstruction processes.

Precautions：

1. During clinical use, the lip and adjacent teeth should be well isolated and protected. Avoid contact with eyes, mucous membranes and skin.

2. Phenols, clove oil and zinc oxide can not be used as the bottom material of the first layer,because clove oil contains polymerization inhibitor "phenolic substances", which will directly affect the degree of polymerization of the adhesive.

3. During the curing operation, the distance between the surface of the light curing lamp and the adhesive should be kept below 2mm, but it should not be in contact with the material.

4. Before applying adhesives and composite resin fillings, the tooth treatment surface should avoid contamination by water and other impurities.

5. It is not suitable for pulp capping, and patients who are allergic to resin should not use it.

Environment：

This product is operated at room temperature.

Storage Conditions：

This product should be stored in a cool and dry place at 2°C~28°C, avoiding direct sunlight.

Shelf Life：

This product is valid for 2 years, please do not use expired product.

Contraindications: 

Patients with a history of allergy to methacrylate resins are contraindicated.