Product Name: Heat shrink tubing with Adhesive (3:1 shrinkage)
Product Material: Polyethylene
Product Specifications: Ø 1.6mm - Ø 65mm
Shrinkage temperature: Starting shrinkage temperature 70°C ~ 80°C, full shrinkage temperature 125°C or more
Temperature range: -55°C to 125°C
Rated voltage: 600V
Colour: Black/White/Red/Green/Yellow/Blue/Transparent/Orange
Characteristics: 3:1 high shrinkage ratio, waterproof sealing, strain relief, self-extinguishing outer layer.
Product Material: Polyethylene
Product Specifications: Ø 1.6mm - Ø 65mm
Shrinkage temperature: Starting shrinkage temperature 70°C ~ 80°C, full shrinkage temperature 125°C or more
Temperature range: -55°C to 125°C
Rated voltage: 600V
Colour: Black/White/Red/Green/Yellow/Blue/Transparent/Orange
Characteristics: 3:1 high shrinkage ratio, waterproof sealing, strain relief, self-extinguishing outer layer.
Application Areas: Mainly used for wire connection, solder joint protection, wire end harnesses, electronic device protection and insulation treatment, parts and metal parts surface protection, rust and corrosion prevention treatment of related products, electrical wires and so on.
Tips for use: It is recommended to use a lighter or hot air gun to heat the shrinkage.
Package Included: depends on your choice. Please select the desired packaging from the drop down menu.
The inner diameter of the heat shrink tubing is the diameter of the circle, not the width after flattening. If you receive flat shrink tubing, the conversion formula is: (flat width * 2) / 3.14 = circle diameter.
Warm tips: the picture is for reference only, size, color, printing, etc. shall prevail in kind.