Power Quality Analyzer with Current Clamp 10mA-10.0A Snapshot and Alarm Function

This Power Quality Analyzer comes with 4PCS DZF-3A-10A Clamp Sensors, CT Size: Ф8mm, Range 10mA~10A

If you needs other sensors , please contact us.

Introduction:

1. Power Quality Analyzer is a comprehensive test instrument carefully developed by our company and specially designed for field test of three phases, multi-functional and intelligent, concise man-machine operation. It is easy to use, large LCD screen display, high resolution, interface in both Chinese and English, shock-proof shell structure and so on. 

2. Can simultaneously measure the 4-channel current (ABC three phase and neutral wire current), 4-channel voltage (ABC three-phase voltage and neutral line voltage to ground), the peak value of current voltage,  maximum/minimum value over a period, three-phase imbalance factor, short-time voltage flicker, transformer K factor, active power, reactive power, apparent power, power factor and displacement power factor, active power, reactive power, apparent power, total harmonic distortion and harmonic, etc; Display real-time waveform, harmonic ratio bar charts of current voltage; 

3. Dynamically capture instantaneous change of voltage current, monitoring starting current, monitoring the power parameters and generate the alarm list, generate the trend chart for a long time record test data.

4. Power quality analyzer adopt DSP + ARM double processor architecture, DSP is use for data collection and the processing of algorithm, the ARM is use for the communication protocol and the man-machine interface processing; Analog signal acquisition is by 2 pieces AD7655 of ADI company. Resolution for AD7655 is 16 bit and it is 4 channel synchronous sampling. 

5. The highest sampling rate can reach 1 MSPS, to ensure the accuracy of the channel and the information integrity, and wouldn’t miss any transient changes in the grid, can more accurate to detect the transient waveform rising and dropping drastically, and waveform instantaneous interrupt; 

6. DSP working frequency is over 200 MHZ, to be able to timely monitoring of the power grid and dynamically adjust the sampling frequency to realize synchronization of power frequency and sampling frequency; 

7. Using a 5.6 -inch LCD color screen display, a resolution of 640 dots x 480 dots, with different display color difference between the parameters of phase, waveform, vector diagram, harmonic ratio, the user can be more efficient and more intuitive understand the state of power grid parameters. 

8. Built-in flash memory can store 60 group of screenshots at the same time, 150 groups of capture transient voltage/current waveform figure, and 12800 groups of alarm list. 

9. Starting current detection model can continuously capture starting current waveform for 100 s. Built-in 2G memory card to store the trend curve record, simultaneous recording 20 parameters (can choose according to need) collect data for once every five seconds, trend curve records can be stored for 300 days.

Product Main Function:

1. This instrument is a comprehensive test instrument of multifunctional, intelligent, man-machine operation simple. Comprehensive analysis and diagnosis all the voltage, current, power, electrical energy, harmonic, phase and other electric parameters

2. 4 channel current and 4 channel voltage measurement, simultaneously capturing and recording electric parameters and waveform, to provide with all the power quality information for working.

3. Line voltage:Below 600V

General Specification:

Power supply	Rechargeable lithium-ion battery packs 9.6V, backup charger.
Battery Level indicator	Battery symbol 5 grid   Display power, when the battery level is low, automatically shut down after 1 minute indication
Working Current	about 590mA, continuous working 8hours.
Display mode	LCD color screen, 640dots × 480dots, 5.6 inches, display field 116mm × 88mm
Instrument Size	240mm×170mm×68 mm.
CT Size	DZF-3Q-10A small sharp current clamp: Ф8mm 7.5mm×13mm;
Number of channels	4 voltages, 4 currents
Line Voltage	1.0V~2000V.
Phase Voltage	1.0V~1000V.
Current	DZF-3Q-10A current clamp: 10mA~10A;
Frequency	40Hz~70Hz.
Electricity Energy Parameter	W, VA, Var, PF, DPF, cosφ, tanφ.
Energy parameters	Wh, Varh, Vah.
Harmonic Wave	Yes, 0 - 50 times
Total harmonic distortion	Yes, 0 - 50 times, each phase
Expert Mode	Yes.
Transient Record Groups	150 groups
Voltage Flicker	Yes
Start Current Mode	Yes, 100 seconds
Three-phases Unbalance	Yes
Record	300 days (record 20 parameters simultaneously, every 5 seconds record 1 point)
Min/Max Recorded Value	Yes, the max min value can be measured for a certain time
Alarm	40 different types of parameter selection, 12800 group alarm logs
Peak	Yes.
Phasor Diagram Display	Automatic
Screenshot Capacity	60 PCS
Menu language	English/Chinese.
Communication Interface	USB.
Automatic Shut Down	In the alarm/trend graph recording/transient capture mode (waiting or in progress), the instrument does not automatically shut down
	In other test modes, there is no button operation within 15 minutes, prompting to automatically shut down after 1 minute.
Backlight Function	Yes, suitable for dark places and nighttime use
Instrument Weight	Host: 1.6kg (with battery).
	DZF-3Q current clamp: 170g×4;
	Test wires and power adapter: 900g;
	Total weight: about 9.2kg (with package).
Voltage Test Wire Length	3M
Current Clamp Wire Length	2M
Working Temperature	-10°C~40°C; below 80%Rh.
Storage Temperature	-10°C~60°C; below 70%Rh.
Input Impedance	Test voltage input impedance: 1MΩ
Withstand voltage	Withstand the sine wave AC voltage of 3700V/50Hz one minute between the instrument line and out shell
Insulation	Between instrument line and shell ≥10MΩ.
Structure	Double insulation, with insulation shock-proof sheath.
Suitable Safely Standard	IEC 61010 1000V Cat III / 600V CAT IV, IEC61010-031, IEC61326, Pollution degree: 2.
Accessories	Host: 1PCS; Instrument Bag: 1pcs; Test Cable: 5PCS (yellow, green, red, blue, black); Alligator Clip: 5PCS; Probe: 5PCS; Charger 1PCS; Software CD: 1COPY; 2G Memory Card: 1PCS;Current Clamp DZF-3Q-10A 4PCS