1:76 scale Showman's fairground Ghost train model starter kit + set of 5 cars
The Laser cut MDF ghost train kit
NOTE! this model does not come with printed instructions
you can view and download the pdf instructions www.lobokit.co.uk
The MDF laser cut kit can be assembled as a static model
or if you wish to try and motorise it there are optional knock out parts for the chain guide pins and if required
panels at the front for adding effects such as lighting saw blades a small screen etc
There is room for your electronics behind the scenes
The kit is a good starting point for your own personalised ghost train model.
As a static model it is very easily put together see instructions.
It is supplied with the doors which can be glued in if static or if you intend trying a working model you
would need to fit hinges of your choice.
The kit is assembled with wood glue or similar.
Dimensions The main body 186 mm wide x 42 mm high x 107 mm front to back
The front is 57 mm high plus wherever height you fix the letters, each letter is 15 mm high
The set of 5 cars
The Ghost train cars are 3D printed in 2 parts, frame and body, the colour may vary dependant on what
colour is in the 3d printer at the time.
The cars are straight from the printer so may need some light sanding before painting
The base frames are left separate for ease of painting and will need to be glued on with superglue or epoxy glue
The base frame size (overall size) is 24 mm long by 16 mm wide
The Body size is 21 mm long by 12 mm wide
The overall height from floor to top highest point when assembled is 17 mm
5 cars with frames are included with this starter kit