| The operation procedures are highly intelligent and totally digital. |
| Compared to the hole position of the pattern lenses, it has higher process accuracy. |
| Whose process deviation is less than 0.075mm in both X-axis and Y-axis. |
| It has auto-position clamping equipment which allows to remain the same process. |
| Accuracy after the change of clamps. |
| The screen shows the drill position and coordinates data, and gives guidance to the operation. |
| The hole position memory function allows to process the set hole positions continuously. |
| Original pattern measurement mode. |
| Mirroring measurement mode. |
| The head can automatically reposition if it is removed from its position accidently. |
| The instrument drills automatically in a set order, and can be corrected by pressing the number. |
| Button if any hole is missed by wrong operations. |
|
| Power Requirement: AC100V-240V DC24V. |
| Power: 50W. |
| Drilling Speed: 0 – 5000 RPM. |
| The Drilling Bits’ eccentricity tolerance: 0.03mm. |
| X-axis moving range (Max.): 155mm. |
| X-axis moving rated load: 50kg. |
| Y-axis moving range (Max.): 38mm. |
| Y-axis moving rated load: 30kg. |
| Clutch suction force (Max.): 1.5kg. |
| Resolution of the encoder: less than 0.07mm. |
| Clamping capacity of the clamp: ≥0.7kg. |
| Dimensions: 302 x 228 x 270 mm. |
| Weight: 5 kg. |
|