Please message me for out-of-stock voltages as these can often be obtained ex-factory within 5 working days! No additional charge applies. Note, any item with ONE(1) in stock comes ex-factory (please message me if you require more than one).

For video on the full XDR/XTR range... click here. For a video on replacing old DIN rail units with the XDR/XTR model... click here.

The XTR power supply operates on "THREE PHASE DELTA AC INPUT" and will continue to operate on single phase 415VAC up to 100% output. Hence if one phase connection is lost they will still operate!

For XDR "SINGLE PHASE AC" power supplies (75W to 960W) see - XDR-E Series.

For lower wattage DIN rail power supplies (inc. 5V) see the HDR series, the MDR series and for the old 3-phase DIN rail power supplies see TDR series For the old low cost series of metal DIN rail power supplies (75W to 480W) see - NDR Series. For a video on installing 2 x NDR-480-24 into a new enclosure... click here.

The Meanwell XTR 240W, 480W and 960W units come in 12V (except 960W), 24V, 36V or 48V and are only 48mm, 63mm, 96mm width respectively. They have 150% to 200% constant current limit on overload for 5 seconds then 100% with automatic recovery. The units are constant current down to 30% Vo, below this they go into hiccup mode. They also have PFC (Power Factor Correction). All units have over temperature and over voltage protection (OTP and OVP). The XTR normal operating range is 380VAC to 500VAC 3-phase or 540VDC to 640VDC and provides an output voltage adjustable from 0% up to +25% (13.8V, 15V, 27.6V and 55.2V can be provided). They fit a standard DIN TS35/7.5 or TS35/15 railing and come with a 5 year Australian warranty. For video on the old Meanwell DIN rail range... click here. For a video on installing an NDR-240-24... click here@.

240W Series
The XTR-240-12 = 12V@15A (12x15=180W), XTR-240-24 = 24V@10A, XTR-240-36 = 36V@6.7A and the XTR-240-48 = 48V@5A.
Weight 0.99kg, size 48x125x125mm. 150% peak output.

480W Series
The XTR-480-12 = 12V@30A (12x30=360W), XTR-480-24 = 24V@20A, XTR-480-36 = 36V@13.3A and the XTR-480-48 = 48V@10A.
Weight 1.18kg, size 63x125x125mm. 200% peak output.
Parallel up to 4 units for 1920W maximum (1440W for 12V output).

960W Series
The XTR-960-24 = 24V@40A, XTR-960-36 = 36V@26.6A and the XTR-960-48 = 48V@20A.
Weight 2.18kg, size 96x125x132mm. 200% peak output.
Parallel up to 4 units for 3840W maximum.

All Meanwell products have a 2 to 7 year warranty. MEAN WELL Enterprises Co., is a Taiwan based company started in 1982 with strong ties worldwide (some well-known companies re-badge their products) and they provide excellent support and backup. Meanwell is a TQM (Total Quality Management) company and is ISO9001 certified. In 2017, the 2-year return rate was 1 in 6600. Meanwell power supplies are extremely reliable in our experience with only one unit DOA (Dead On Arrival) that was replaced and three returned during the warranty period in the 15+ years we have been selling... one power supply had been installed in a control box outdoors (for advertising) and had been attacked by a nest of ants! Meanwell now offers a range of fully sealed units (IP65 and IP67 rated)... please ask us for advice for outdoor and hazardous environments. For a company video - click here.

Some "on-the-web" comments... 1. "I have hundreds of 600 Watt 24V Meanwells running in the field and probably another 100+ 350Watt 5V running in the field and they are the most reliable piece of equipment compared to everything else. I've -never- replaced one in over 11 years, but I have replaced a lot of cruddy circuit boards designed or assembled by the less technically inclined (companies).", 2. "But in the end I've learnt a lesson here and that is spend the extra cash and buy some quality power supplies like the meanwell brand or else you could be in for a very frustrating time but I don't have the budget for that this year so I'll have to deal with what I have (sad face)". 3. Need a decent power supply... I can recommend mean well supplies. They are low end industrial supplies but are good quality, much better than no-name chinese supplies you can get from ebay etc.. I use mean well in lots of equipment and have had very few failures in thousands of hours of run time.

We also provide a download (or CDROM on request) with the documentation in PDF format and other information on Meanwell products.

All goods sold in Australia include GST, a tax invoice is provided.

EXPRESS DELIVERY INCLUDED.

A re-written user manual is provided (also in PDF format on CD-ROM) because we care that all products that we sell have clear and easily readable information and instructions with adequate warnings about any dangers or precautions that need to be taken!

@ in the video (click here) he does everything right (even using a piece of cardboard to protect from falling metal debris during construction work)... HOWEVER he does not connect to ALL output terminals! Please remember ALWAYS connect to ALL output terminals and parallel them externally! Also beware of "fakes" and "look-a-likes" (with logos of "MWKJ", "M&W", "MiWi", "WH", "MN", "MIEG WAEI", "NWJS" for example) these are often cheap, low quality products that do not meet the safety requirements for use in Australia. Also beware of purchasing this product from overseas as an Australian Warranty will not be provided. This unit has exposed 240VAC terminals and must be installed inside a suitable enclosure according to local electrical authority regulations. +NOTE, any power supply above 150W that does not have POWER FACTOR CORRECTION most-likely does not meet C-TICK or EMI requirements for use, on 240VAC mains in Australia! You can generally tell if a high-wattage (> 150W) power supply does NOT have "active" PFC because it will have a switch to select 115VAC or 230VAC. The advantage of "active" PFC is that not only is the AC mains current reduced (and of course "in phase" with voltage... something that power companies prefer), but the electrical interference (EMI) is reduced (less harmonics) BUT also it stablises the input allowing the AC voltage to vary greatly WITHOUT having to use a SWITCH which activates voltage doubling when the AC input is less than 180VAC. PLEASE download the PDF document "Buying electrical equipment online" from Energy Safe Victoria.