*Compatibility Chart
1, You can distinguish specific model of an automobile by VIN(Vehicle Identification Number).
2, VIN(Vehicle Identification Number) consists of total 17 English letters and arabic digits.
3, VIN does not include the letters I (i), O (o), and Q (q) (to avoid confusion with numerals 1 and 0).
Land Rover Range Rover
Autobiography Black Sport Utility 4-Door 5.0L 2014
Autobiography LWB Sport Utility 4-Door 5.0L 2017-2019
Autobiography Sport Utility 4-Door 5.0L 2013-2020
Autobiography Sport Utility 4-Door 2.0L 2020
Base Sport Utility 4-Door 5.0L 2013
Base Sport Utility 4-Door 3.0L 2014-2020
HSE Sport Utility 4-Door 5.0L 2013
HSE Sport Utility 4-Door 3.0L 2014-2020
HSE Sport Utility 4-Door 2.0L 2020
Supercharged Sport Utility 4-Door 5.0L 2013-2019
SV Autobiography Dynamic Sport Utility 4-Door 5.0L 2018-2020
SV Autobiography Sport Utility 4-Door 5.0L 2016-2020
Vogue SE Sport Utility 4-Door 5.0L 2013 2017
Vogue Sport Utility 4-Door 5.0L 2014-2016 2018-2019
Range Rover Sport
Autobiography Dynamic Sport Utility 4-Door 5.0L 2016 2018-2020
Autobiography Dynamic Sport Utility 4-Door 3.0L 2019
Autobiography Dynamic Sport Utility 4-Door 2.0L 2020
Autobiography Sport Utility 4-Door 5.0L 2014-2018
Base Sport Utility 4-Door 5.0L 2014-2016
HSE Dynamic Sport Utility 4-Door 5.0L 2019-2020
HSE Dynamic Sport Utility 4-Door 3.0L 2017-2019
HSE PHEV Sport Utility 4-Door 2.0L 2019
HSE Sport Utility 4-Door 5.0L 2017-2018
HSE Sport Utility 4-Door 3.0L 2014-2020
HSE Sport Utility 4-Door 2.0L 2020
HST Sport Utility 4-Door 3.0L 2016 2019 2020
S Sport Utility 4-Door 3.0L 2019
SE Sport Utility 4-Door 3.0L 2014-2020
Supercharged Dynamic Sport Utility 4-Door 5.0L 2016 2018 2019
Supercharged Sport Utility 4-Door 5.0L 2014-2018
SVR Sport Utility 4-Door 5.0L 2015-2020
*Generation & Evolution:
Range Rover
Classic First generation (1970-1996)
P38A Second generation (1994-2002)
L322 Third generation (2002-2012)
L405 Fourth generation (2013-present)
Range Rover Sport
L320 First generation (2005-2013)
L494 Second generation (2013-present)
SVR (2015 Pre-Facelift)
SVR (2018 Facelift)
*Removal Guideline:
Caution: Damage to the vehicle and air suspension system can be incurred if work is carried out in a manner other than specified in the instructions or in a different sequence.
1.To avoid the possibility of short circuits while working with electric components consult your owner's manual on how to disconnect your battery.
2.Consult your vehicle owner's manual, service manual, or car dealer for the correct jacking points on your vehicle and for additional care, safety and maintenance instructions. Under no circumstances should any work be completed underneath the vehicle if it is not adequately supported, as serious injuries and death can occur.
1.Set steering to straight ahead.
2.Raise vehicle.
3.Remove the applicable front wheel. (picture 1)
4.Disconnect the electrical connection from the top of the strut by pressing in on the two tabs and pulling upwards. (picture 2)
5.Loosen and remove the air line from the top of the strut. (picture 3, 4)
6.Remove the air line fitting. To do so, spread the collet open and the remaining fitting will slide off of the air hose. (picture 5, 6, 7, 8)
7.Loosen and remove the top mounting nuts. (picture 9, 10)
8.Loosen and remove the sensor wire and brake line bracket. (picture 11, 12, 13)
9.Locate and remove the upper control arm ball joint nut. Seperate the ball joint from the spindle assembly. (picture 14, 15, 16)
10.Loosen and remove the lower strut mounting bolt. (picture 17)
11.Remove the sensor wire bracket and seperate the end link from the lower strut clevis. (picture 18, 19, 20)
12.Loosen the strut clevis. (picture 21)
13.Pull the spindle assembly outward and remove the strut. (picture 22)
14.Removal complete.
*Installation Guideline:
Installation is in reverse order of air spring removal, with the exception of the Secured reservoir hose.
*Warning & Notice:
Vent all air pressure from the air suspension system prior to disconnecting or removing any air suspension components. It is dangerous to remove air suspension components while under pressure. Failure to follow this instruction may result in serious personal injury.
Any air spring which is unfolded must be refolded prior to being installed in a vehicle. Refer to the procedure. An incorrectly folded air spring could rupture, altering the handling characteristics of the vehicle. If a vehicle has been driven with an incorrectly folded air spring, a new air spring must be installed. Failure to follow these instructions may result in serious injury to vehicle occupant(s).
Failure to observe the following instructions may result in a sudden failure of the air spring or suspension system.
Any rear spring which is unfolded must be refolded prior to being installed in a vehicle.
The air spring refolding procedure should only be used for an air spring which has never supported the vehicle's weight while in the incorrectly folded position.
Incorrectly folded air springs found on vehicles during pre-delivery inspection or after use must be installed new.
Do not attempt to inflate any air spring which has been collapsed while uninflated from the rebound hanging position to the jounce stop.
When installing a new air spring, care must be taken not to apply a load to the suspension until springs have been inflated using the air spring fill procedure.
After inflating an air spring in the hanging position, it must be inspected for correct shape.
1.NOTE: The vehicle must be positioned on a suitable lifting device prior to deflating the air suspension system.
With the vehicle in NEUTRAL, position on a hoist until the wheel and tire assemblies are slightly above the ground.
2.Using the scan tool, vent the air springs.
3.Remove the air spring retainer.
4.Detach the air spring from the rear axle.
5.Remove the air spring in the following sequence.
1.Disconnect the air spring solenoid electrical connector.
2.Compress the quick connect locking ring and pull out the air tube.
3.Remove the air spring.
*OEM Part Number:
LR038805 LR038807
LR052776 LR057257
LR060137 LR072460
LR087092
LR038801 LR038803
LR052774 LR057251
LR060135 LR072447
LR087081
*Item Specifications:
- Key Words: Front Pair Air Suspension Shock Struts For Land Rover Range Rover L405, Range Rover Sport L494 2013-2012
- Package Includes: Pair for Front Left & Right Air Suspension Shock Struts
Notes: Please double confirm the compatibility as well as the OEM number before purchasing.
Instruction is not included. Professional installation is recommended.
