Check out the pics. It’s in perfect shape.
I’m gonna take both stabilizers and the pedals off for shipment because it will cut your shipping costs by almost half when it’s in a smaller box. It’s super simple to put back together. 2 bolts in each stabilizer with a washer and a 1/2 inch cap nut on top. Stabilizers are labeled front and rear. The pedals are labeled for which side they go in. Screw the pedal into the arm on the corresponding side with a 15 mm wrench until it is seated. Then thread the lock nut onto the back and tighten down with a 19 mm wrench while using the 15 mm wrench to keep the pedal side from loosening. That’s it. For what it’s worth, when I got this bike the previous owner had only hand tightened all the nuts and it worked perfectly fine. I didn’t even know they weren’t fully tightened until I took it apart for the pics. So if you don’t have wrenches you can still put it back together and it will function properly.