Product Overview

OCS202 OCXO Frequency reference Thermostatic Crystal Oscillator Module

Detail

OSC202 Thermostatic Crystal Oscillator OCXO Module 2-Channel 10MHz Signal Output

•OSC202 OCXO module frequency accuracy is 10MHz signal (+/-200ppb);

•2-channel signal output, one is a standard 10MHz sine wave signal, the other is a 10MHz frequency multiplier signal. The frequency division has 16 types, the signal output frequency division is selected through DIP Code Switch.

•User can adjust RV1 potentiometer to correct the deviation of the 10MHz frequency (+/-2.0ppm).

•P1: Power input interface; (7~9V 500MA).

• P2: 10MHz sine wave signal output interface; (10Mhz amplitude: 2.5Vpp) SMA interface

• P3: 10MHz N-frequency pulse signal output interface; (10Mhz/N amplitude: 5Vpp) SMA interface

• RV1: Correct the deviation of 10Mhz output frequency (+/-2.0ppm)

• DIP Code Switch Frequency Selection code table:

00: A3=0, A2=0, A1=0, A0=0, OUT = 2.5MHz

01: A3=0, A2=0, A1=0, A0=1, OUT = 2.0MHz

02: A3=0, A2=0, A1=1, A0=0, OUT = 1.0MHz

03: A3=0, A2=0, A1=1, A0=1, OUT = 500KHz

04: A3=0, A2=1, A1=0, A0=0, OUT = 200KHz

05: A3=0, A2=1, A1=0, A0=1, OUT = 100KHz

06: A3=0, A2=1, A1=1, A0=0, OUT = 50KHz

07: A3=0, A2=1, A1=1, A0=1, OUT = 25KHz

08: A3=1, A2=0, A1=0, A0=0, OUT = 20KHz

09: A3=1, A2=0, A1=0, A0=1, OUT = 10KHz

10: A3=1, A2=0, A1=1, A0=0, OUT = 5KHz

11: A3=1, A2=0, A1=1, A0=1, OUT = 1KHz

12: A3=1, A2=1, A1=0, A0=0, OUT = 100Hz

13: A3=1, A2=1, A1=0, A0=1, OUT = 50Hz

14: A3=1, A2=1, A1=1, A0=0, OUT = 10Hz

15: A3=1, A2=1, A1=1, A0=1, OUT = 2Hz

0 = connect directly to ground(L)

1 = connect directly to VDD(H)