Sun ZX 24-Bit Color Frame Buffer
Option# X1094A
Part# 501-1845
Description: ZX 24-Bit Color Frame Buffer
Condition: Clean, Tested, Pull
Specifications:
- 2 Board Set
- 501-1843 - Upper Board
- 501-1844 - Lower Board
- 501-1845 = 2 Board Set - 24-Bit Color Frame Buffer
- Dual SBus Motherboard connectors
- STEREO Port
- DB13W3 Female Video Connector
Supported Sun Microsystems Workstations and Servers:
- SPARCclassic / Sun-4/15
- SPARCstation LX / SPARCstation ZX / Sun-4/30
- SPARCstation 2 / Sun-4/75
- SPARCstation 5 / SS5
- SPARCstation 10 / SS10
- SPARCstation 20 / SS20
- Ultra 1 / A11
- Ultra 1 Creator / A12 (Ultra1E)
- Ultra 2 / A14
- SPARCserver 1000 / SS1000
- SPARCcenter 2000 / SC2000
Screen Resolutions:
- 640 x 480 60Hz
- 770 x 575 50Hz
- 960 x 680 108Hz
- 960 x 680 112Hz
- 1024 x 768 60Hz
- 1024 x 768 76Hz
- 1152 x 900 66Hz
- 1152 x 900 76Hz
- 1280 x 1024 76Hz
- 1280 x 1024 67Hz
Manufacturer Notes:
- The minimum operating system is Solaris 2.2.
- The GT/ZX Supplement to Solaris 2.2 is recommended.
- The final software release is Solaris 2.6.
- The ZX Graphics Accelerator uses the /opt/SUNWleo device driver.
- Standoff 240-2716 and Screw 240-2102 fasten the boards together.
- The Sun-4/15/30/75 requires three 250-1195-01 rubber bumpers.
- The SC1000 and SC2000 require three 240-2090-01 nylon screws.
- The SC1000 and SC2000 require three 240-2103-01 nylon standoffs.
- The Ultra 1 and 1E require SBus Extender Cable 530-2290.
- The Ultra 1 and 1E require Ferrite 150-2633 if the stereo output is used.
Screen Resolutions Notes:
- The variable monitor_type is defined in /etc/init.d/leoconfig.
- Make temporary changes to the screen resolution with the following command: /etc/opt/SUNWleo/bin/leoconfig -M monitor_type
- Make permanent changes to the screen resolution by removing the comment symbol # from the desired setting in /etc/init.
You are purchasing a fully tested and guaranteed working 501-1845 Sun ZX Frame Buffer.
Ships SAFE and Fast!!!