Carbusonic MSP Bond Multilayer Adhesive is a one-component, highly elastic MS-polymer wood flooring adhesive designed for secure, lasting installations. Its solvent-free, low-emission formula cures quickly into a tough yet flexible bond that adapts to the natural expansion and contraction of wood. Ideal for engineered wood flooring boards up to 300mm wide and solid wood boards up to 150mm wide, it provides reliable adhesion on a variety of subfloors including cement screeds, calcium sulphate flow floors (flow screeds), and chipboard. Fast-setting and underfloor-heating compatible, MSP Bond simplifies installation while ensuring a smooth, durable finish.
One-component MS-polymer formula – Ready to use out of the bucket; no mixing required. Provides a highly elastic, long-lasting bond.
Solvent-free and low-emission (low VOC) – Safe, virtually odor-free application that promotes healthier indoor air quality.
Fast-setting formula – Accelerates installation by reducing curing time, allowing floors to be used sooner.
Easy, clean application – Spreads smoothly in uniform beads (excellent thread formation) when applied with a toothed float; it is not runny or messy.
High elasticity – Flexes with wood’s natural expansion and contraction for a resilient, crack-resistant bond.
Suitable for all wood floor types – Effective on strip, mosaic (parquet), floorboards, multi-layer panels, and solid hardwood floors.
Ideal for tongue-and-groove systems – Forms extremely secure joints in interlocking boards.
Underfloor heating compatible – Designed to work with all common underfloor heating systems without degradation.
Secure, lasting bond – Provides an extremely strong adhesive connection that keeps flooring stable and fixed over time.
Resilient and shock-resistant – The elastic cure absorbs vibrations and movements, reducing the risk of cracks or loose boards.
Works on difficult subfloors – Bonds even on older or chalky (worn) surfaces, enhancing adhesion on marginal subfloors without the need for special primers.
Cleaner installation – Low odor, no harmful solvents, and excellent bead control mean less mess and fuss.
Time-saving – Fast-setting properties mean quicker project completion and less downtime.
Suitable surfaces – Use on prepared cement screeds, calcium sulphate flow screeds (anhydrite), and approved chipboard subfloors. Ensure the substrate is clean, dry, and level.
Board sizes – Engineered wood flooring boards up to 300mm wide; solid wood boards up to 150mm wide.
Application method – Spread adhesive evenly using a toothed (notched) float or trowel (do NOT use a roller) to achieve full coverage.
Installation – Lay boards into the fresh adhesive beads immediately and press firmly, ensuring good contact across the entire board underside.
Cleanup – Wipe off any excess adhesive from board surfaces or gaps before it cures for a neat, professional finish.
Coverage – Approximately 1kg of adhesive covers about 1 square meter (coverage depends on board width and trowel notch).
Available pack sizes: 1kg, 5kg, 10kg, 20kg, and 38kg containers (choose the size to fit your project).
Coverage: About 1kg per 1m² (with recommended trowel; varies with substrate and board dimensions).
Manufacturer: Carbusonic – MSP Bond Multilayer Adhesive is a premium one-component MS-polymer wood flooring adhesive made for professional results.