The RAM yoke clamp mount will fit rails from 0.625" to a maximum of 1.25". The 1" rubber ball is at a right angle to the plane of the mount; when connected to a rail, the ball sits parallel to the rail. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip™ III clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip™ III clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets.  Please verify dimensions of your tablet & case for compatibility with the X-Grip III™.
These are very sturdy and have a wide range of adjustment; they should be able to accommodate a tablet with virtually any case. It seems to work well with most folding kneeboards as well.

Compatible with the following tablets: (This is a PARTIAL list, see dimensions below or contact us if you need more information or your tablet is not listed.)

Apple iPad Air (All Versions/Generations)
Apple iPad 9.7 (2017-2018)
Apple iPad Pro 9.7 (1st Generation)
Apple iPad Pro 10.5 (2nd Generation)
Apple iPad Pro 11" (Including 2020)
Apple iPad 10th Generation, with or without case
Apple iPad 9th Generation, with or without case
Apple iPad 8th Generation, with or without case
Apple iPad 7th Generation, with or without case
Apple iPad 6th Generation, with or without case
Apple iPad 5th Generation, with or without case
Apple iPad 4 (With Lightning Connector) WITH OR WITHOUT CASE
Apple iPad 3 WITH OR WITHOUT CASE
Apple iPad 2 WITH OR WITHOUT CASE
Apple iPad 1 WITH OR WITHOUT CASE
HP TouchPad WITH OR WITHOUT LIGHT DUTY CASE
Asus EEE Pad WITH OR WITHOUT CASE
Asus Eee Pad Transformer WITH OR WITHOUT CASE
Lenovo LePad Slate WITH OR WITHOUT CASE
LG G-Slate WITH OR WITHOUT CASE
LG Optimus Pad WITH OR WITHOUT CASE
Motorola XOOM WITH OR WITHOUT CASE
Motorola XYBOARD 10.1 WITH OR WITHOUT CASE
Pandigital R90A200 WITH OR WITHOUT CASE
Samsung Galaxy Tab 2 A10-70
Samsung Galaxy Tab 4 10, 10 Plus
Samsung Galaxy Tab A10
Samsung Galaxy Tab3 10 Business
Samsung Galaxy Tab 8.9 WITH OR WITHOUT CASE
Samsung Galaxy Tab 10.1 WITH OR WITHOUT CASE
Samsung Galaxy Tab 2 10.1 WITH OR WITHOUT CASE
Samsung Galaxy Tab 10.5 WITH OR WITHOUT CASE
Samsung Galaxy Tab A 9.7 with or without case
Samsung Galaxy Tab A 10.5, with or without case
Samsung Galaxy Tab S2 9.7, with or without case
Samsung Galaxy Tab S3 9.7, with or without case
Samsung Galaxy Tab S4 10.5, with or without case
Samsung Galaxy Tab S6, with or without case
Samsung Galaxy Tab S7, with or without case
Samsung Galaxy Tab S7+, with or without case
Toshiba Thrive WITH OR WITHOUT CASE


Cradle Dimensions:
Maximum Height 10.25" (using optional supports, unlimited without)
Minimum Width = 6.25"
Maximum Width = 8.1"
Depth = 0.875"

Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite

RAM mounts are made here in the US. They are the best mounts available and carry a lifetime limited factory warranty.



INTERNATIONAL CUSTOMERS PLEASE NOTE: 
  • DELIVERY TIMES are estimates - if not outright wild guesses - from Ebay and the carriers only and are NOT guaranteed. Our experience is that standard Priority Mail shipments to Canada, Australia and most of Europe generally arrive in a week or two but there are exceptions. First Class Package service, where available, will take longer. Some regions can take three weeks to a couple of months; see below for specific trouble spots. PLEASE ALLOW ADEQUATE TIME FOR YOUR SHIPMENT TO ARRIVE.
  • CUSTOMS PROCESSING may cause additional delays; we have no control over this and are not responsible for the consequences.  
  • CUSTOMS, DUTY, BROKERAGE, VAT & OTHER charges may be imposed by the destination country; these costs are typically collected by the carrier at the time of delivery and are the responsibility of the purchaser. We have no control over this either; please check with your local authorities FIRST if you have questions. 
  • WE CANNOT mark shipments as gifts or reduce stated values for customs purposes.
  • CUSTOMERS IN SOUTH AND CENTRAL AMERICA, AFRICA & SOME PARTS OF ASIA: On occasion, conventional mail to these regions can take as long as two to three months due to customs processing and the mail systems in these areas, and tracking data can be spotty once the shipment leaves the US. We have no control over this. We HIGHLY recommend USPS Express Mail in these cases as it gets better tracking and generally takes no longer than a week or two even under the worst of circumstances.
  • SELECTING ANYTHING OTHER THAN USPS EXPRESS MAIL OR EBAY INTERNATIONAL DELIVERY TELLS US AND EBAY THAT YOU UNDERSTAND THE ABOVE INCLUDING THE POTENTIAL FOR DELAYS AND AGREE TO WAIT.
Copyright © Fetter Aviation Co, 2017-2024
All product names, logos, and brands are property of their respective owners.
All rights reserved.
The RAM yoke clamp mount will fit rails from 0.625" to a maximum of 1.25". The 1" rubber ball is at a right angle to the plane of the mount; when connected to a rail, the ball sits parallel to the rail. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip™ III clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip™ III clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as