1)Double head
2)Double treatment
3)Floor Standing TDP lamp
4)Control method: Mechanically (0-60 minutes or norm open)
Design feature: Having separate systems between the head and controlling part(be convenient for repairing and changing); two heads have two separate systems(when one system is broken,the other can be used as a single one, not to delay the patient treatment); can up and down; with five legs.
Technology Parameter:
Curing plate diameter: 6-1/2in(diameter 116mm)
Control Timer: Manual
Voltage, Frequency: 110V, 60Hz
Electric power: 250W
Head: Removable
Life of Curing Plate: 1,000-1,500 hours
Life of heater: >1,000 hours
Arm lifting range: 12-52 in (30-135cm)
Arm extending range: 9-29 in (20-73cm)
Vertical bar adjustable range: 0-8 in (0-20cm)
Elevation (degree): 90---180
Azimuth(degree): 0---360
Executive standards: CE
Weight: 11.8 kg
Package size: 61*46*25 cm
Packing list:
Head *2
Arm *2
Controller *2
Vertical Bar *1
Base *1
MAINTENANCE AND REPAIR
1. Avoid strongly shaking the unit, avoid moisture and keep the curing plate intact.
2. Prevent the power wire from burning.
3. If the power indicator of lamp isn't lit after turning on the unit, but the curing plate can be heated, you should not use the unit. It means that the power indicator fails. For models with a digital timer, you can buy a new motherboard to replace the failed one.
4. If the heater is broken, you can change a new one or the whole part including the safety grilling cover, heater and curing plate.