
Handheld Sewing Machine Troubleshooting Manual
1. Please put in 4 AA new batteries at correct place and make sure positive and negative poles correspond to each other.
(Note: If you put the batteries at wrong place, the machine will not work.)
2. Put the cloth under the fastening plate there, press the button start for sewing.
(Note: Make sure the safety lock is unlock before every time use, and the cloth can not over 1.8mm, if not, machine will not work. For safety, remember to lock the safety lock after use)
3. After sewing, you have to tie a knot, because it is a single thread sewing machine.
(Note: When you remove the machine, the thread goes to the back, please remember that it must be knotted. If not the thread will come unsewn.)
4. If you can't sew and skip threads, What to do ?
There is a screw on the front of the needle, loosen it first, put the needle to the most insides, if it still doesn't work, put the needle down a little more.
(Note: The head of the sewing machine must be facing the directly in front, if not, machine will also can not work. Hold the head of the sewing machine with pliers and fine-tune it to the right.)