Twilight switch TS-43-4
Professional switch for assembly on the top of the merchant
NEW! Automatic switch-off in the middle of the night +-2h adjustable
Sensorbox (rubber lampling) can be extended up to 100 metersEquipment highlights:
- Assembly on the top of the top
- Ideal for consumers who should be switched off in the evening and in the middle of the night
- Depending on the connection scheme - NO/NC (closure/opener)
- Galvanically separate contacts
- Cable sensor
- More precisely setting area (1-1000 LX) by logarithmic setting
- Inrush relay (max load in the Peak 100a)
- 3 LED lights on function control
- The consumer is approx. 30 seconds. Delayed
- Simple and professional assembly
- 3 year guarantee
Can switch on or off at dusk at dusk
Top quality
through long -term Experience
Made in the EU
The twilight switch TS-43-4 independently switches on or off the consumer (lamps, advertising signs, etc.) when the darkness occurs and switches it off again or at dawn.
In the twilight switch TS-43-4 you can also set a lower range of values (1-10 LX), which is used for the outside lighting. The higher setting range (> 10-1000 LX) can be helpful for other applications.
Typical applications for the switch -off function include: water wells, pumps, electrical fences (in agriculture), heating systems and much more
Functions of the twilight switch TS-43-4:
Nonlinear adjustment characteristics, which is divided into two sub -areas:
| Sub -area 1 ... 10 LX | Subordly 10 ... 1000 LX |
|---|---|
| most energy -saving setting | The control of the lighting of streets, houses, parks, squares, etc. |
Automatic switch -off in the middle of the night - adjustable +-2h
3 LEDs as status lights.
The LEDs provide information about the functional states (existing input voltage, reaching the circuit value (without delay), switching on the consumer. You will inform you about damage from the consumer if the LEDs tackle and the actual consumer does not.
Assembly on din Hutschiene (35mm)
Sensorbox (rubber lamples) can be extended up to 100 m - independent assembly possible
High quality switching relay type G2RL-1-E from Omron with a switching current of 16A and peak from 100a
Professional execution - 3 year guarantee
Technical data:
| Operating voltage | 230V AC,+10%,-15% |
| frequency | 50Hz |
| Maximum switching current: | |
|---|---|
| Ohmsche load | 16a, AC1 (4000 W) |
| Incandescent lamps | 10a (2500 W) |
| Halogen lamps | 8a (2000 W) |
| Fluorescent lamps | 8a (2000 W) |
| LED and energy -saving lamps | 8a (2000 W) |
| Electricity | 1.1W |
| Executing switch | 1xno (closer), 1xnc (opener) |
| Setting area | 1 ... 100 LX |
| Hysteresis | Eoff = 2 eon |
| Delay of on/off switching | 30 seconds (± 20%) |
| Mechanical durability | 100,000 cycles |
| Protection type of the control element | IP 00 |
| Protection type of the sensor | IP 65 |
| Operating temperature range | -25 ...+50 ° C |
| Assembly | 1 module 18 mm on rail 35 mm |
| Weight | 100g |
| Assembly position | perpendicular |
- 1x twilight control TS-41
- 1x sensor box (rubber wing)
- 1x installation instructions