2001-2006 Suzuki GSXR1000
Complete Performance 525 Conversion RK Chain & Supersprox Sprocket Kit in -1t/+1t Quick Acceleration ratio
ULTIMATE 525 Conversion Performance!
RK's Highest Tensile Strength 525 Racing Chain = Longest Life / Fewer Adjustments
Correctly Rated for 1300cc Engines , #10,430lbs Tensile Strength , up to 220hp !
Including RK's Highest Strength 525 Racing Chain Available, and Supersprox 525 Rear with JT Steel 525 front sprocket
Also Optional Ratios Available from RPE Motorcycle....
Quick Acceleration 16/43t -1t/+1t (DEFAULT)**
-or- **OEM Ratio 17/43t (oem ratio, exact '07/08 gsxr1000 oem)
*Included in this kit unless otherwise specified: QA Ratio 16/43t gearing sizes will be sent as follows.
JT 16 (-1t) Front & 43 (+1t) Rear Supersprox Sprocket.
JT SCM420 steel front and BLUE SUPERSPROX STEALTH rear sprocket, with a Premium Racing Strength RK ZXW 525 x 110L Gold/Gold XW-Ring drive chain with a Rivet type master link.
On Sale NOW, with..*FREE SHIPPING!!
*USA Only (including Hawaii, Alaska, V.I. and Puerto Rico)
International Customers, PLEASE LEAVE PHONE NUMBER FOR CUSTOMS
Also available in optional gear ratios...at no extra charge.
Contact RPE Motorcycle to special order !!
RPE Motorcycle, 10725 Beverly Blvd., Whittier, CA 90601 RPEcycle.
Chain & sprockets are sent with Gold chain with a RIVET type master link.
Please specify in "MESSAGE TO SELLER" tab during step 2 of checkout if optional gearing is desired.
For reference... OEM Suzuki Gear Ratio and Pitch
2001-2006 Suzuki GSXR1000 OEM size is 530x110L x-ring chain, 17t Ft. Sprocket, 42t Rear Sprocket
2007-2008 Suzuki GSXR1000 OEM size is 530x112L x-ring chain, 17t Ft. Sprocket, 43t Rear Sprocket
For QUICK ACCELERATION 16/43t gear ratio (QUICKER off the line, QUICKER roll on's, EASIER wheelies),
** DEFAULT KIT RATIO UNLESS OTHERWISE SPECIFIED **
Including a 16t (-1t) front sprocket and a 43t (+1t) rear sprocket.
Although your bike will be much quicker with this Q.A. kit , it wil be a little slower on top speed, and a little higher RPM's at top gear cruising speeds.
16/43t QA Kit is the DEFAULT for this listing.
For OEM RATIO GEARING, Request 17t front sprocket and 42t rear sprocket during checkout in the "ADD MESSAGE TO SELLER" tab.
OEM 17/42t size may not be available.Call or Message RPE M/C to confirm. Original Factory Supplied OEM size sprockets are the calculated "Happy Medium" of off the line acceleration, roll on's, and reasonable high speed engine rpm's with the least amount of compromise on either top end or low end acceleration. If you are using your entire gear box ratio as it is from the factory, then order the OEM ratio 2007-08 17/43t kit.
Teeth and Sizes Explained...
** A -1t front sprocket change is EXACTLY the same ratio change as +3t rear sprocket change.
** A +1t front sprocket change is EXACTLY the same ratio change as -3t rear sprocket change.
** A -1t front and +2t rear combination is EXACTLY the same as a +5t rear only change with stock front sprocket.
** A 520 size chain is approx. 2mm narrower than a 525 chain, and 4mm narrower than a 530 chain.
Less mass equals lighter weight equals easier to spin, but the ratio (teeth size) change makes the big difference.
The sprocket width matches the chain width where it rides on the sprockets, thus a 520 chain must use 520 sprockets, and a 525 chain must use 525 sprockets, etc...
** RPE Motorcycle has chain and sprocket conversion kits available in 520 , 525 , and 530 sizes for most motorcycles.
** A larger rear sprocket number of teeth size requires a longer chain, however +1 or -1 tooth on the front sprocket only will use the same chain length
.Available optional size sprockets...
JT Steel Ft. Sprocket also available in 525 x 15t , 16t and 17 teeth
BLUE Supersprox Stealth Rr. Sprocket also available in 525 x 43t only
RPE Motorcycle does NOT drop ship our products from a far away warehouse!
RPE Chain and Sprockets Kits are shipped to you directly from RPE Motorcycle.
Orders of advertised products will ship the same day or next day from date payment is made.
(Custom order kits welcome)
All RK 525 ZXW chains include RIVET type master link.
"CLIP type" master links are NOT available in RK 525 ZXW, they DO NOT exist!