Trinity Solderless™ By 24 Volt Mod™
Replacing your pickup selector switch has never been easier.
Completely solderless installation. See our installation video.
Requires 34mm height clearance inside cavity.
Nut may be hex or knurled depending on our current inventory.
Features:
Metric for universal fit in imported and American guitars.
Compatible with all ACTIVE or PASSIVE guitar pickups that use a 3 way pickup selector switch.
Screw terminal connectors.
Also features pin header connection and is compatible with EMG quick connect switches.
Available in 3 Way Toggle Style or 3 Way Blade Style Switches. (see our other products)
For (2) pickup configurations. More configurations will be available in the future.
Replacement tip colors can be purchased separately.
Available Options;
Switch only. (No wire included Includes mini screwdriver)
Bare end wire. "6" or 17” shielded wire with bare ends for screw terminal connection or custom configurations. Also compatible with our Trinity Soldeless™ EZ Active Pickup Install™ system.
Trinity & EMG compatible quick connect wire. 6" or 17” shielded wire with quick connect ends and can be used with EMG quick connect system and switches also compatible with our Trinity Soldeless™ EZ Active Pickup Install™ system.
Basic installation instructions;
Bare Wire: To replace your old switch, simply cut the wires as close to the old switch as possible.
Strip back approx. ¼” of insulation from each wire and reconnect using the screw terminals.
Quick connect: Plug the quick connect wire into the pin headers in the correct orientation (see diagram included with purchase) and connect to EMG quick connect power buss.
For new installations follow your pickup manufactures wiring diagram.
Due to variations in manufacture, products may vary slightly in appearance.
Due to monitor variations colors may appear different than actual.
Except as set forth in the item description, the seller disclaims any functions, use or warranties expressed or implied. Use of this product is done at the user’s own risk. All liability lies solely with the user. In the event of an error or fault by the seller, the seller will only be responsible for original purchase cost only.
This is an aftermarket part.
We are not affiliated with nor endorsed by EMG, Seymour Duncan, Fishman or any other company.