Welcome to the UpBeat Store, your ultimate destination for top-tier automotive aftermarket installations, covering both OEM and aftermarket radios with precision and finesse. With extensive experience in the industry, trust us to elevate your driving experience seamlessly. Don't forget to follow us and visit frequently for the latest deals. Our dedicated customer service team is here to assist you promptly and professionally as we turn your automotive aspirations into reality!

This listing includes two new items, the PAC LPA-E.4 advanced 4-channel active line output converter with remote control, and the PAC LPHHY06 LocPro Advanced Audio Integration T-Harness made for select non-amplified 2011-2023 Hyundai & Kia vehicles with a 35-Pin / 38-Pin radio connector.

PAC's LPHHY06 LocPRO Advanced T-harness makes amplifier installation a lot easier by giving you access to the speaker-level output signals from your Hyundai and Kia factory radio. You can use this T-harness to connect to an amplifier or signal processor with speaker-level inputs, or to a line output converter with an amp.

PAC designed this vehicle-specific T-harness to work with their LPA LocPRO Advanced line output converters, but it'll also work with almost any sound processor or line output converter, as well as most amplifiers with high-level inputs. The harness also supplies the connection wires for low-power constant 12 volts (fused for your protection), accessory power, ground, and remote turn-on leads for a system device like an active signal processor.

The LPA-E.4 is a 4 inputs and 4 outputs active line output converter that features incredible input power capabilities, enhanced output controls, and noise isolation countermeasures. Combined with the newest vehicle systems' compatibility, these features are the gateway for your audio aspirations.

This converter lets you add an amp without affecting the existing factory system — you just tap into the wires going to a pair of full-range speakers for the LPA's inputs. Selectable load resistance and ground isolation options ensure trouble-free OEM integration. A gain control with a clip light adjusts the signal level for optimum strength and fidelity. A low-pass filter and bass boost fine-tune the bass to sound its best.

What’s included?
  • LPA-E.4 4-channel advanced line output converter
  • LPA-REM Bass level controller
  • LPHHY06 V3 35-Pin/38-Pin 8" Harness
  • Clearly labeled pigtail harnesses
    • LPH-SPK V2-A Harness (front signal from amp)
    • LPH-SPK V2-B Harness (rear signal from amp)
    • LPH-SPK V2-C Harness (front signal to amp)
    • LPH-SPK V2-D Harness (rear signal to amp)
    • LPH-SPK V2-E Harness (sub signal T-harness to amp)
    • LPH-SPK V2-F Harness (power extension) 
  • LPH Harness Instruction Guide

Compatibility Requirements/Notes:

  • This harness is designed to work on OEM NON-AMPLIFIED systems. Not compatible in vehicles equipped with a factory amplifier.
  • Only compatible with vehicles equipped with a 35-Pin/38-Pin radio connector.
  • Four channel converter has 4 inputs and 4 outputs
  • The power and ground wires in this harness will only support a low-current accessory, like an active line output converter or digital signal processor and should not be used to power an amplifier.

Vehicle Compatibility

MAKE

MODEL

YEAR(S)

HYUNDAI

ELANTRA

2017-2022

HYUNDAI

ELANTRA GT

2018-2020

HYUNDAI

IONIQ

2017-2022

HYUNDAI

KONA

2018-2022

HYUNDAI

PALISADE

2020-2022

HYUNDAI

SANTA CRUZ

2022

HYUNDAI

SANTA FE

2019-2022

HYUNDAI

SONATA

2017-2022

HYUNDAI

TUCSON

2019-2020

HYUNDAI

VELOSTER

2019-2020

KIA

CADENZA

2017-2019

KIA

CARNIVAL

2022-2023

KIA

EV6

2022-2023

KIA

FORTE

2017-2022

KIA

FORTE KOUP

2011-2013

KIA

K5

2021-2022

KIA

NIRO

2022-2023

KIA

OPTIMA

2019-2020

KIA

RIO

2018-2021

KIA

SEDONA

2017-2021

KIA

SELTOS

2021-2023

KIA

SORENTO

2019-2022

KIA

SPORTAGE

2017-2022

KIA

STINGER

2018-2022

KIA

TELLURIDE

2022

***Only compatible with the above listed vehicles***

LPHHY06 Features

  • Simplifies audio equipment installation.
    • Provides all necessary high-level input and speakers outputs for aftermarket audio equipment
  • Can be used with: PAC LocPRO Line Output Converters, and Audiocontrol's Amplifiers, DSPs and Line Output Converters.
  • Available 17' extension for further flexibility (LPHEXT17) (Not included)

LPA-E.4 Features

  • Aluminum housing
  • 40V / 400W maximum @ 20kΩ
  • Low pass filter (CH3/4 only)
  • Bass boost (CH3/4 only)
  • Dual variable gain controls 
  • Selectable ground (common, ISO or 200Ω)
  • Load selections: 20Ω, 60Ω, 20KΩ
  • Clip indicator
  • Turn-on mode selection (remote and DC)
  • 9.5V Output voltage
  • Removable quick-connect with screw-type terminal.
  • Wide range DC offset
  • 4 Channel IN & 4 Channel Out Unfiltered OR 2 Channel IN & 4 Channel Out Unfiltered
  • Independent Clip indicator for Front and Rear

*LPA-REM Bass level controller included*

Model Number:

LPA-E.4

Channels:

4 IN – 4 OUT

Operating Voltage:

9V – 16V

Max Input Level (20kHΩ Load Setting):

40V / 400W at 4 Ohms

Auto Turn On:

DC Offset / Remote

Output Voltage MAX at 13.8V:

9.5V RMS

Turn On Trigger (DC-Offset):

3V-7V

Load Input Impedance:

 20Ω, 60Ω, 20kΩ

Output Impedance:

<120Ω

Variable Gain Adjustment:

-28dB-+1dB

Signal to Noise:

>110dBA at 6.4V Output

THD+N:

<0.01%

Input Sensitivity:

0.5V-20V

Frequency Response:

10Hz – 20KHz

Current Draw (Max):

110mA

Low Pass Filter:

<250Hz (Rear Channels)

Bass Boost:

0dB to +12dB

Clip Indicator:

Yes

Remote Level Control:

0dB - 30dB

Chassis Type:

Aluminum Extrusion

Terminal Gauge:

18AWG / Quick Connect

Additional Notes
We recommend having a professional certified technician handle the installation. For any questions or concerns about the product, please contact us through the "Contact Seller" feature for technical support or customer assistance.