|
70T Crawler Track Pin Disassemble Machine Track Pin Press Remover |
|
|
|
 |
| Function |
- Crawler pin remover for chain dismounting machine, using the
principle of converting hydraulic energy into mechanical energy, is a special
tool for dismantling the crawler pin of the crawler excavator. The electric pump
is used as the power source to make the hydraulic jack move forward. Therefore,
the pin shaft can be removed smoothly, which is a special tool for the
maintenance and assembly of the crawler excavator.
|
| Product information |
|
|
- Rated
voltage:110V
- Rated power:1500W
- Weight:283.73lbs+87.3lbs
- Chain range:<35mm/1.38in
- Pressure sleeve range:<120mm/4.72in
- Screw diameter：40/50mm(1.57in/1.96in)
- Screw length:1000mm/39.37in
- Cylinder
stroke:100mm/3.937in
- Operating
pressure:0-63Mpa
- Pump station volume:16L
- Note:There will be a little error in manual
measurement.
- The product pump station is equipped with a
plug.
- The tank should be filled with hydraulic oil, and then
powered on to start, otherwise the pump station will be damaged and pay for
itself.
- The pump station needs to add 46 # or 68 # anti-wear
hydraulic oil by yourself.
|
| Applications |
|
|
| Product advantages |
- Improve replacement efficiency and reduce labor
intensity.
- Does not damage the track, and can prolong the service life of
the track compared to the traditional way of replacing the track.
- One machine for two purposes, efficient and fast.
|
| Product Photograph |
|
|