This is for the Mk4 model GHD's, If your GHD's have resistors R8 and R11 i am supplying 50/47ohm or 100ohms melf resistors. There is loads of guides on YouTube on how to repair dead GHD's. I recommend that you use a multi meter to check the resistors before ordering, And make sure that there is no other faults with your GHD's. 

 

I have been repairs Ghd's with R8/R11 and i use the 47 Ohm Resistor as that is the nearest to match also these are 400mw resistor slightly better rating than the original which are 250mw.

If you are unsure please send me a message. Include a picture of your board and faulty resistor. 

And I'll do my best to help and advise.