About this item

【Full Cover Trigger, No Scratch, No Jitter】 The holsters for S&W M&P Shield/Shield Plus M2.0 9mm/.40 3.1" STR TLR-6/TLR-6 HL full covering all access to the trigger,securely retained with minimal drag,which can avoid all possible accidents,NOTE:STR TLR-6/TLR-6 HL lights must be attached.
【FIT LIKE A GLOVE WITH AN AUDIBLE CLICK】Thanks to the Adjustable Retention Screw, you can dial in perfection with a Phillips Screwdriver. The inherent positive retention “positive click SNAP”sound,ensures the firearm is secure when holstered.
【Adjustable Cant & Retention Pressure】The cant settings are easily adjustable from 0 to 30 degrees. Be it appendix, strong-side, kidney carry, it allows for a perfect grip on the S&W M&P Shield/Shield Plus M2.0 9mm/.40 3.1" w/STR TLR-6/TLR-6 HL.
【1.5’’ Belt Fit Perfect】 S&W M&P Shield/Shield Plus M2.0 9mm/.40 3.1" STR TLR-6/TLR-6 HL IWB holster belt clip is suitable for 1.5’’ belt, with hook in buttom, it stick firmly in your belt when drawing and holding.
S&W M&P Shield/Shield Plus STR TLR-6/TLR-6 HL Holster is compatible fits Smith & Wesson M&P Shield/Plus 9/40 M2.0,M&P Shield Performance Center & Plus, M&P Shields with or without thumb safety.(NOTE:STR TLR-6 Pistol Light MUST be attached).
IWB/OWB Mag Carrier is compatible fits virtually every 9mm/.357 Sig/.40 Double/Stack and Staggered Stack Magazine,Including but not limited to for Glock models 17,19,19x,22,23,25,26,27,28,31,32,33,34,35,37,38,39 and Glock 43x/MOS,Glock 48/MOS,Sig P320/P365/P365 SAS/P365 SAS w/P365X ,S&W M&P Compact, S&W M&P M2.0/PLUS,CZ P07/P10C,H&K VP9/VP40/VP9SK,Springfield armory XD/MOD.2/XDM/HELLCAT,Taurus PT111 G2/G2C/G3C etc.
IWB/OWB Mag Carrier is compatible fits virtually every 9mm/.40 single stack. Including but not limited to for GLOCK 43,Smith & Wesson Shield 9mm/.40,Sig Sauer P290RS,Taurus PT 709/740 Slim,Springfield XDS,Ruger LC9/LC9s,Walther PPS,Kahr CW9/CW40,Kimber Solo Carry,SCCY CPX-1/-2,Beretta Nano,Remington R51 etc

Product Description

Rounded,Hand Finished Edges,adds to a layer of comfort without digging into the body or thigh,he trigger guard is intentionally undercut to promote a higher grip on the S&W M&P Shield/Shield Plus M2.0 9mm/.40 3.1"w /TLR-6/TLR-6 HL and allow for magazine release while the firearm is fully holstered.
Distinct features such as the Rounded, Hand Finished Edges finish and minimal material facilitate a comfortable fit, providing maximum concealment for concealed carry.
Universal Mag Carrier is compatible fits virtually every 9/.40 Double/Single Stack Magazine. The enclosed design ensures rounds do not get pushed out of the mag unintentionally.
Included with Purchase:
1*S&W M&P Shield/Shield Plus M2.0 9mm/.40 3.1"w/ TLR-6 /TLR-6 HL Holster
1*9/.40 Double Stack Mag Carrier
1*9/.40 Single Stack Mag Carrier


You can carry with confidence, knowing each IWB Holster is custom formed and for S&W M&P Shield/Shield Plus M2.0 9mm/.40 3.1"w /TLR-6/TLR-6 HL lights,securely retained with minimal drag,Minimal to zero drag until retention point keeping holster wear down to a minimum. Undercut Trigger Guard: The under-cut trigger guard permits a full grip on the firearm, and allows for admin reloads,to promote a higher grip on for S&W M&P Shield/Shield Plus M2.0 9mm/.40 3.1"w/TLR-6/TLR-6 HL lights Pistol Holster and allow for magazine release while the firearm is fully holstered.	Thanks to the Adjustable Retention Screw, you can dial in perfection with a Phillips Screwdriver. The inherent positive retention “positive click SNAP”sound,ensures the firearm is secure when holstered. Full Sweat Shield: The full sweatshield keeps your sweat off your firearm and adds an additional layer of comfort,full sweat shield to aid in re-holstering by giving you and indexing point and to keep clothing out of the opening.	The cant settings are easily adjustable from 0 to 30 degrees. Be it appendix, strong-side, kidney carry, it allows for a perfect grip on the for S&W M&P Shield/Shield Plus M2.0 9mm/.40 3.1" w/TLR-6/TLR-6 HL lights Pistol Holster. IWB holster belt clip is suitable for 1.5’’ belt, with hook in buttom, it stick firmly in your belt when drawing and holding.


Universal IWB/OWB Mag Carrier is compatible fits virtually 9/.40 Double/Single Stack Magazine. The enclosed design ensures rounds do not get pushed out of the mag unintentionally. 1.5" Standard Belt Clip can be swapped from side-to-side, Can be worn be worn outside the waistband (OWB) or inside the waistband(IWB )for Right or Left Handed shooters. 0-25 degrees of adjustable cant can be made with the slotted holes on either side of the carrier.	IWB/OWB Mag Carrier is compatible fits virtually every 9mm/.357 Sig/.40 Double/Stack and Staggered Stack Magazine,Including but not limited to for Glock models 17,19,19x,22,23,25,26,27,28,31,32,33,34,35,37,38,39 and Glock 43x/MOS,Glock 48/MOS,Sig P320/P365/P365 SAS/P365 SAS w/P365X ,S&W M&P Compact, S&W M&P M2.0/PLUS,CZ P07/P10C,H&K VP9/VP40/VP9SK,Springfield armory XD/MOD.2/XDM/HELLCAT,Taurus PT111 G2/G2C/G3C etc. IWB/OWB Mag Carrier is compatible fits virtually every 9mm/.40 single stack. Including but not limited to for GLOCK 43,Smith & Wesson Shield 9mm/.40,Sig Sauer P290RS,Taurus PT 709/740 Slim,Springfield XDS,Ruger LC9/LC9s,Walther PPS,Kahr CW9/CW40,Kimber Solo Carry,SCCY CPX-1/-2,Beretta Nano,Remington R51 etc	With the 1/8 allen wrench Adjustable fit virtually every 9/.40 Double/ Single Stack magazine. In addition, it allows incremental adjustments to be made, so you can dial in the perfect retention for your mag draw.holding your mag securely in place. Proper grip when drawing the mag on reload.

S&W M&P Shield/Shield Plus Pistol Holster

Compatlble with :

Smith & Wesson M&P Shield/Plus 9/40 M2.0 (NOTE:STR TLR-6/TLR-6 HL Pistol Light MUST be attached).
M&P Shield Performance Center & Plus (NOTE:STR TLR-6 /TLR-6 HLPistol Light MUST be attached).
M&P Shields with or without thumb safety (NOTE:STR TLR-6/TLR-6 HL Pistol Light MUST be attached).

NOTE: Is not optic compatible.